Features: • Low dropout voltage (980mV at 300 mA)• Enable pin implements sequencing• Vout tolerance less than 2 % over temperature• Featured in the very small SOT-23 package• Stable with low cost 1F capacitor• Low ground current• Thermal protection with hy...
BQ8211: Features: • Low dropout voltage (980mV at 300 mA)• Enable pin implements sequencing• Vout tolerance less than 2 % over temperature• Featured in the very small SOT-23 package&...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter | Value | Units |
Maximum VIN | 18 | Volts |
Maximum VENABLE | Vin + 0.3V | Volts |
Power Dissipation (Internally limited) | ||
Maximum Junction Temperature | 150 | °C |
Operating Junction Temperature Range | -40 to 125 | °C |
Storage Temperature Range | -65 to 150 | °C |
Lead Temperature (Soldering, 4 sec.) SOT- 23-5 package | 300 | °C |
The BQ8211 is a low dropout voltage regulator capable of delivering 300 mA to the load. It is adjustable and can set a precise voltage from 1.175V to 15V with two external resistors. The BQ8211 meets all specifications down to 1.175V output, unlike CMOS LDO's which loose performance with outputs below 2.25V.
The BQ8211 enable pin provides a remote turn-off for low power consumption. It draws virtually zero current while in shutdown mode.
To assure accuracy within 2% over temperature, the heart of the BQ8211 is a self-correcting AcuRef™ bandgap reference.
On-chip current of BQ8211 limit and thermal shutdown with hysteresis protects against any combination of overload and ambient temperature that might cause the junction temperature to exceed safe limits.