BSP742R

On Time (Max) :
Off Time (Max) :
Mounting Style : SMD/SMT
Number of Outputs : 1
Operating Supply Voltage : 5 V to 34 V
Maximum Operating Temperature : + 150 C
Package / Case : DSO-8
Supply Current (Max) : 1.3 mA
On Resistance (Max) : 0.25 Ohms


Description

The BSP742R is a N channel vertical power FET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, monolithically integrated in Smart SIPMOS technology.Providing embedded protective functions.The reverse load current of BSP742R through the intrinsic drain-source diode has to be limited by the connected load.Power dissipation is higher compared to normal operating conditions due to the voltage drop across the drain-source diode. The temperature protection of BSP742R is not active during reverse current operation. 

Features of the BSP742R are:(1)overload protectioncurrent limitation; (2)short circuit protection; (3)thermal shutdown with restart; (4)overvoltage protection (including load dump); (5)fast demagnetization of inductive loadsreverse battery protection with external resistor; (6)open drain diagnostic output; (7)open load detection in OFF - state; (8)CMOS compatible input; (9)loss of GND and loss of Vbb protection; (10)ESD - protection; (11)very low standby current.

The absolute maximum ratings of the BSP742R can be summarized as:(1)supply voltage:40V;(2)storage temperature:-55 to 150;(3)operating temperature:-40 to 150;(4)power dissipation:1.5W;(6)continuous input voltage:-10 to 16V.The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s).In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement.In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.

At present there is not too much information about this model.If you are willing to find more about BSP742R, please pay attention to our web! We will promptly update the relevant information.

Parameters:

Technical/Catalog Information	BSP742R
Vendor	Infineon Technologies
Category	Integrated Circuits (ICs)
Package / Case	DSO-8
Mounting Type	Surface Mount
Type	High Side
Voltage - Supply	5 V ~ 34 V
On-State Resistance	250 mOhm
Current - Output / Channel	400mA
Current - Peak Output	1.2A
Packaging	Tape & Reel (TR)
Input Type	Non-Inverting
Number of Outputs	1
Operating Temperature	-40°C ~ 150°C
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	BSP742R BSP742R