Breakover Current IBO Max
:
On-State RMS Current (It RMS)
:
Rated Repetitive Off-State Voltage VDRM
: 600 V
Gate Trigger Current (Igt)
: 50 mA
Mounting Style
: Through Hole
Package / Case
: TO-220AB
Holding Current (Ih Max)
: 50 mA
Off-State Leakage Current @ VDRM IDRM
: 0.005 mA
Gate Trigger Voltage (Vgt)
: 1.7 V
Packaging
: Rail
DescriptionThe BTA12-600BW3G is designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. The features of BTA12-600BW3G are as follows: (1)Blocking Voltage to 800 V; (2)On-State Current Rating of 12 A RMS at 25; (3)Uniform Gate Trigger Currents in Three Quadrants; (4)High Immunity to dV/dt - 2000 V/s minimum at 125; (5)Minimizes Snubber Networks for Protection; (6)Industry Standard TO-220AB Package.
The following is about the absolute maximum ratings of BTA12-600BW3G: (1)On-State RMS Current (Full Cycle Sine Wave, 60 Hz, TC = 80°C): 12 A; (2)Peak Non-Repetitive Surge Current (One Full Cycle Sine Wave, 60 Hz, TC = 25°C): 105 A; (3)Circuit Fusing Consideration (t = 8.3 ms): 46 A2sec; (4)Non-Repetitive Surge Peak Off-State Voltage (TJ = 25°C, t = 10ms): VDSM/VRSM +100 V; (5)Peak Gate Current (TJ = 125°C, t = 20ms): 4.0 A.
The electrical characteristics of the BTA12-600BW3G are: (1)Peak Repetitive Blocking Current (VD = Rated VDRM, VRRM; Gate Open): 0.005mA at TJ = 25°C, 2.0mA at TJ = 125°C; (2)Peak On-State Voltage (ITM = ±17 A Peak): 1.55 V; (3)Gate Trigger Current (Continuous dc) (VD = 12 V, RL = 30) MT2(+), G(+): 2.5 to 50 mA; (4)Holding Current (VD = 12 V, Gate Open, Initiating Current = ±100 mA): 50 mA; (5)Latching Current (VD = 12 V, IG = 60 mA) MT2(+), G(+): 70mA; (6)Gate Trigger Voltage (VD = 12 V, RL = 30 ) MT2(+), G(+): 0.5 to 1.7 V.
Parameters: | Technical/Catalog Information | BTA12-600BW3G |
| Vendor | ON Semiconductor |
| Category | Discrete Semiconductor Products |
| Triac Type | Standard |
| Configuration | Single |
| Voltage - Off State | 600V |
| Current - On State (It (RMS) (Max) | 12A |
| Voltage - Gate Trigger (Vgt) (Max) | 1.1V |
| Current - Gate Trigger (Igt) (Max) | 50mA |
| Current - Hold (Ih) (Max) | 50mA |
| Current - Non Rep. Surge 50, 60Hz (Itsm) | 105A @ 60Hz |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 (Straight Leads) |
| Packaging | Tube |
| Drawing Number | * |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | BTA12 600BW3G
BTA12600BW3G
|
BTA12-600BW3G Data Sheet
