BTS4880R

Crosstalk :
Bandwidth :
On Time (Max) :
Off Time (Max) :
Switch Voltage (Max) :
Operating Supply Voltage :
Maximum Operating Temperature :
Number of Switches :
Switch Configuration :
Mounting Style : SMD/SMT
On Resistance (Max) : 0.27 Ohms
Package / Case : DSO-38


Features:

• Output current 0,625 A per channel
• Short circuit protection
• Maximum current internally limited
• Overload protection
• Input protection
• Overvoltage protection (including load dump)
• Undervoltage shutdown with autorestart and hysteresis
• Switching inductive loads
• Thermal shutdown with restart
• Thermal independence of separate channels
• ESD - Protection
• Loss of GND and loss of V_bb protection
• Very low standby current
• Reverse battery protection
• Programmable input for CMOS or V_bb/2
• Common diagnostic output ( current output ) for overtemperature


Application

• Output driver for industrial applications ( PLC )
• All types of resistive, inductive and capacitive loads
• µC or optocoupler compatible power switch for 24 V DC applications
• Replaces electromechanical relays and discrete circuits


Specifications

Parameter at Tj=-40...135,unless otherwise specified	Symbol	Value	Unit
Supply voltage	Vbb	-11)...45	V
Continuous input voltage2)	VIN	-10...Vbb
Continuous voltage at LS-pin	VLS	-1...Vbb
Load current (Short - circuit current, see page 6)	IL	self limited	A
Current through input pin (DC), each channel	IIN	±5	mA
Reverse current through GND-pin1)	-IGND	1.6	A
Operating temperature	Tj	internal limited
Storage temperature	Tstg	-55 ... +150
Power dissipation3)	Ptot	3.3	W
Inductive load switch-off energy dissipation4) single pulse,  Tj = 125 C,  IL = 0.625 A  one channel active all channels simultaneously active ( each channel )	EAS	10 1	J
Load dump protection4)  VLoadDump5)= VA  + VS VIN = low or high td  = 400 ms, RI = 2  , RL  = 27  , VA  = 13.5 V  td  = 350 ms, RI = 2  , RL  = 47  , VA  = 27 V	VLoaddump	90 117	V
Electrostatic discharge voltage (Human Body Model) according to ANSI EOS/ESD - S5.1 - 1993 ESD STM5.1 - 1998 Input pin, LS pin, Common diagnostic pin all other pins	VESD	±1 ±5	kW
Continuous reverse drain current1)4), each channel	IS	4	A

1.defined by P_tot
2.At V_IN > V_bb, the input current is not allowed to exceed ±5 mA.
3.Device on 50mm*50mm*1.5mm epoxy PCB FR4 with 6 cm2 (one layer, 70m thick) copper area for drain connection. PCB is vertical without blown air.
4.not subject to production test, specified by design
5.V_Loaddump is setup without the DUT connected to the generator per ISO 7637-1 and DIN 40839.Supply voltages higher than V_bb(AZ) require an external current limit for the GND pin, e.g. with a 150 resistor in GND connection. A resistor for the protection of the input is integrated.


Description

N channel vertical power FET BTS4880R with charge pump, ground referenced CMOS or V_bb/2 compatible input and common diagnostic feedback, monolithically integrated in Smart SIPMOS^® technology. Providing embedded protective functions.


Parameters:

Technical/Catalog Information	BTS4880R
Vendor	Infineon Technologies
Category	Integrated Circuits (ICs)
Package / Case	DSO-36
Mounting Type	Surface Mount
Type	High Side
Voltage - Supply	11 V ~ 45 V
On-State Resistance	150 mOhm
Current - Output/Channel	625mA
Current - Peak Output	1.4A
Packaging	Tape & Reel (TR)
Input Type	Non-Inverting
Number of Outputs	8
Operating Temperature	-25°C ~ 125°C
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	BTS4880R BTS4880R