Purchase C261, In-stock C261 From SeekIC.
Part Number: C261
Description: The W541E261 and W541C261 are high-performance 4-bit microcontroller (C) with an LCD driver and the fl...
- Table of contents:
C261
-
Suppliers
DataSheet
General Description
C261 General Description
The W541E261 and W541C261 are high-performance 4-bit microcontroller (C) with an LCD driver and the flash EEPROM and mask ROM for the program memory. The device contains a 4-bit ALU, two 8-bit timers, two dividers, a 32 * 4 LCD driver, and five 4-bit I/O ports (including 1 output port to drive the LEDs). There are also five interrupt sources and 8-level subroutine nesting for interrupt applications. The W541E261 and W541C261 have two power reduction modes, hold mode and stop mode, which help to minimize power dissipation.
The W541E261 and W541C261 have two oscillator circuits and can work in dual-clock or single-clock operation mode. It is suitable for remote controllers, watches and clocks, speech synthesis LSI controllers, hand-held games and other products.
C261 Maximum Ratings
|
Parameter |
RATING |
UNIT |
| Supply Voltage to Ground Potential |
-0.3 to +7.0 |
V |
| Applied Input/Output Voltage |
-0.3 to +7.0 |
V |
| Power Dissipation |
120 |
mW |
| Ambient Operating Temperature |
0 to +70 |
|
| Storage Temperature |
-55 to +150 |
and reliability of the device.
C261 Features
• Operating voltage: 2.4V to 5.5V (LCD drive voltage: 3.0V, or 4.5V)
• Operating frequency up to 4 MHz
• Crystal/RC oscillation circuit selectable by code option for system clock
• Memory
− 2048 * 16 bit program ROM (including 2K * 4 bit look-up table)
− 128 * 4 bit data RAM (including 16 working registers)
− 32 * 4 LCD data RAM
• Single or Dual Clock Mode
− Single (main oscillator only) or dual clock (both main and sub-oscilator) by mask option .
− Dual-clock slow operation mode: system is operated by the sub-oscillator (FOSC = Fs and Fm is stopped)
− Sub-oscillator is only 32.768 KHz crystal for dual clock mode.
− Main oscillator is crystal or RC oscillation by mask code option .
− Main clock : High-frequency clock (400 KHz to 4 MHz) or low-frequency clock (32.768 KHz) is selected by
mask code option.
• 21 input/output pins
− Ports for input only: 2 ports/8 pins
− Input/output ports: 2 ports/8 pins
− Port for output only: 1 port /4 pins (high sink current to drive LEDs)
− MFP output pin: 1 pin (MFP)
• Power-down mode
− Hold function: no operation (except for oscillator)
− Stop function: no operation
• Five types of interrupts
− Four internal interrupts (Divider 0, Divider 1, Timer 0, Timer 1)
− One external interrupt (Port RC)
• LCD driver output
− 32 segment * 4 common
− Static, 1/2 duty (1/2 bias), 1/3 duty (1/2 or 1/3 bias), 1/4 duty (1/3 bias) driving mode can be selected
− LCD driver output pins can be used as DC output ports; selectable by code option
• MFP output pin
− Output is software selectable as modulating or nonmodulating frequency
− Works as frequency output specified by Timer 1
• Two built-in 14-bit clock frequency divider circuit (divider 0 and divider 1) W541E/C261 DATA SHEET
• Two built-in 8-bit programmable countdown timers
− Timer 0: one of two internal clock frequencies (FOSC/4 or FOSC/1024) can be selected
− Timer 1: includes an auto-reload function; and one of three internal clock frequencies (FOSC or FOSC/64,Fs)
can be selected or falling edge of pin RC.0 can be selected (output through MFP pin)
• Built-in 18/14-bit watchdog timer selectable for system reset
• Powerful instruction set: 120 instructions
• 8-level subroutine (include interrupt) nesting
• Up to 1 S instruction cycle (with 4 MHz operating frequency)
• Packaged in 80-pin QFP
• Operating frequency up to 4 MHz
• Crystal/RC oscillation circuit selectable by code option for system clock
• Memory
− 2048 * 16 bit program ROM (including 2K * 4 bit look-up table)
− 128 * 4 bit data RAM (including 16 working registers)
− 32 * 4 LCD data RAM
• Single or Dual Clock Mode
− Single (main oscillator only) or dual clock (both main and sub-oscilator) by mask option .
− Dual-clock slow operation mode: system is operated by the sub-oscillator (FOSC = Fs and Fm is stopped)
− Sub-oscillator is only 32.768 KHz crystal for dual clock mode.
− Main oscillator is crystal or RC oscillation by mask code option .
− Main clock : High-frequency clock (400 KHz to 4 MHz) or low-frequency clock (32.768 KHz) is selected by
mask code option.
• 21 input/output pins
− Ports for input only: 2 ports/8 pins
− Input/output ports: 2 ports/8 pins
− Port for output only: 1 port /4 pins (high sink current to drive LEDs)
− MFP output pin: 1 pin (MFP)
• Power-down mode
− Hold function: no operation (except for oscillator)
− Stop function: no operation
• Five types of interrupts
− Four internal interrupts (Divider 0, Divider 1, Timer 0, Timer 1)
− One external interrupt (Port RC)
• LCD driver output
− 32 segment * 4 common
− Static, 1/2 duty (1/2 bias), 1/3 duty (1/2 or 1/3 bias), 1/4 duty (1/3 bias) driving mode can be selected
− LCD driver output pins can be used as DC output ports; selectable by code option
• MFP output pin
− Output is software selectable as modulating or nonmodulating frequency
− Works as frequency output specified by Timer 1
• Two built-in 14-bit clock frequency divider circuit (divider 0 and divider 1) W541E/C261 DATA SHEET
• Two built-in 8-bit programmable countdown timers
− Timer 0: one of two internal clock frequencies (FOSC/4 or FOSC/1024) can be selected
− Timer 1: includes an auto-reload function; and one of three internal clock frequencies (FOSC or FOSC/64,Fs)
can be selected or falling edge of pin RC.0 can be selected (output through MFP pin)
• Built-in 18/14-bit watchdog timer selectable for system reset
• Powerful instruction set: 120 instructions
• 8-level subroutine (include interrupt) nesting
• Up to 1 S instruction cycle (with 4 MHz operating frequency)
• Packaged in 80-pin QFP
C261 Connection Diagram
C2611
PDF/DataSheet Download
- Datasheet: C2611
- File Size: 873372 KB
- Manufacturer: ETC [ETC]
- Click here to Download
Hotspot Suppliers Product
STDP8028-AB
Price: 10-20 USD
10-bit, Single-chip, enhanced monitor controller, 409 HSBGA
KH29LV320CBTC-70G
Price: 0.84-1.22 USD
TSSOP, 32-mega, bit Flash memory, 4M butes, 4,194×8/2,097,152×16 switchable, Sector structure
ECPU1C224MA5
Price: 0.06-0.2 USD
Plastic Film Chip Capacitor, 0.10 μF to 1.0 μF, Low ESR, 16 VDC
CM1200HB-66H
Price: 1-2 USD
module, 2nd-version HVIGBT module, with high voltage, insulated gate, bipolar transistor, 1200A, 3...
D70320L-8
Price: 6-8 USD
V25TM 16/8-BIT SINGLE-CHIP MICROCONTROLLER
DIR9001PW
Price: 5-6 USD
audio interface receiver, TSSOP, –0.3 to 4 V
SMV1702-999
Price: 0.001-5 USD
silicon hyperabrupt junction varactor diode, SMD, high capacitance ratio, low RS, 20 mA, RoHS-comp...
INA115AU
Price: 1-10 USD
low cost, general purpose, instrumentation amplifier, SOP, ±18v, low drift
ADS1210U
Price: 1-4 USD
24-Bit analog-to-digital converter, differential inputs, programmable gain amplifier, SOP18
AT89C51-24PI
Price: 1-2 USD
CMOS 8-bit microcomputer, -1.0V to +7.0V, Three-level Program Memory Lock
AAT1168
Price: 1-4 USD
triple-channel TFT LCD power solution, 7 V, QFN, Low Dissipation Current
MG15J6ES1
Price: 24-32 USD
INSULATED GATE BIPOLAR TRANSISTOR - Toshiba Semiconductor
