CC1111Fx

Features:

• Radio
  o High-performance RF transceiver based on the market-leading CC1101
  o Excellent receiver selectivity and blocking performance
  o High sensitivity (−110 dBm at 1.2 kBaud)
  o Programmable data rate up to 500 kBaud
  o Programmable output power up to 10 dBm for all supported frequencies 
  o Frequency range: 300 - 348 MHz, 391 - 464 MHz and 782 - 928 MHz
  o Digital RSSI / LQI support
• Low Power
  o Low current consumption (RX: 16.2 mA @ 1.2 kBaud, TX: 15.2 mA @ −6 dBm output power)
  o 0.3 A in PM3 (operating mode with the lowest power consumption, only external interrupt wakeup)
  o 0.5 A in PM2 (operating mode with the second lowest power consumption, timer or external interrupt wakeup)
• MCU, Memory, and Peripherals
  o High performance and low power 8051 microcontroller core.
  o Powerful DMA functionality
  o 8/16/32 KB in-system programmable flash, and 1/2/4 KB RAM
  o Full-Speed USB Controller with 1 KB FIFO (CC1111Fx )
  o 128-bit AES security coprocessor
  o 7 - 12 bit ADC with up to eight inputs
  o I2S interface
  o Two USARTs
  o 16-bit timer with DSM mode
  o Three 8-bit timers
  o Hardware debug support
  o 21 (CC1110Fx ) or 19 (CC1111Fx ) GPIO pins
  o SW compatible with CC2510Fx/CC2511Fx
• General
  o Wide supply voltage range (2.0V - 3.6V)
  o RoHS compliant 6x6 mm QLP36 package


Application

• Low-power SoC wireless applications operating in the 315/433/868/915 MHz ISM/SRD bands
• Wireless alarm and security systems
• Industrial monitoring and control
• Wireless sensor networks
• AMR - Automatic Meter Reading
• Home and building automation
• Low power telemetry
• CC1111Fx: USB dongles


Specifications

Parameter	Min	Max	Units	Condition
Supply voltage (VDD)	−0.3	3.9	V	All supply pins must have the same voltage
Voltage on any digital pin	−0.3	VDD + 0.3, max 3.9	V
Voltage on the pins RF_P, RF_N and DCOUPL	−0.3	2.0	V
Voltage ramp-up rate		120	kV/s
Input RF level		10	dBm
Storage temperature range	−50	150	°C	Device not programmed
Solder reflow temperature		260	°C	According to IPC/JEDEC J-STD-020D
ESD CC1110Fx		1000	V	According to JEDEC STD 22, method A114, Human Body Model (HBM)
ESD CC1110Fx		750	V	According to JEDEC STD 22, C101C, Charged Device Model (CDM)
ESD CC1111x		750	V	According to JEDEC STD 22, method A114, Human Body Model (HBM)
ESD CC1111x		750	V	According to JEDEC STD 22, C101C, Charged Device Model (CDM)

Description

The CC1110Fx/CC1111Fx is a true low-power sub- 1 GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC1110Fx/CC1111Fx combines the excellent performance of the state-of-the-art RF transceiver CC1101 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and up to 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.

The CC1110Fx/CC1111Fx is highly suited for systems where very low power consumption is required. CC1111Fx is ensured by several advanced low-power operating modes. The CC1111Fx adds a full-speed USB 2.0 interface to the feature set of the CC1110Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.