CD4518BE

The CD4518BE is one member of the CD4518B series.The CD4518 dual BCD up-counter consists of two identical, internally synchronous 4-stage counters.The counter stages are D-type  flip-flops  having  interchangeable CLOCK and ENABLE lines for incrementing on either the positive-going or negative-going transition.For single-unit operation the ENABLE input is maintained high and the counter  advances  on  each  positive-going transition of the CLOCK.The CD4518BE counters are cleared by high levels on their RESET lines.The counter can tie cascaded in the ripple mode by connecting 04 to the enable input of the subsequent counter while the CLOCK input of the latter is held low.

Features of the CD4518BE are:(1)5-V,10-V;and 15-V parametric ratings;(2)standerdized, symmetrical output characteristic.The CD4518B type is supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages (E suffix),16-lead small-outline packages (M,M96,and NSR suffixes),and 16-lead thin shrink small-outline packages (FNV and PWR suffixes).Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered documentation.

The absolute maximum ratings of the CD4518BE can be summarized as:(1)DC supply-voltage range:-0.5 to 20V;(2)storage temperature:-65 to 150;(3)operating temperature:-55 to 125;(4)lead temperature(soldering, 10 sec):265;(5)CD4518BE device dissipation per output transistor:100 mW.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.