CD54HC195

The device is useful in a wide variety of shifting, counting and storage applications. It performs serial, parallel, serial to parallel, or parallel to serial data transfers at very high speeds.

The two modes of operation, shift right (Q₀-Q₁) and parallel load, are controlled by the state of the Parallel Enable (PE) input. Serial data enters the first flip-flop (Q₀) via the J and K inputs when the PE input is high, and is shifted one bit in the direction Q₀-Q₁-Q₂-Q₃ following each Low to High clock transition. The J and K inputs provide the flexibility of the JKtype input for special applications and by tying the two pins together, the simple D-type input for general applications. The device appears as four common-clocked D flip-flops when the PE input is Low. After the Low to High clock transition, data on the parallel inputs (D0-D3) is transferred to the respective Q0-Q3 outputs. Shift left operation (Q₃-Q₂) can be achieved by tying the Q_n outputs to the Dn-1 inputs
and holding the PE input low.

All parallel and serial data transfers are synchronous, occurring after each Low to High clock transition. The 'HC195 series utilizes edge triggering; therefore, there is no restriction on the activity of the J, K, Pn and PE inputs for logic operations, other than set-up and hold time requirements. A Low on the asynchronous Master Reset (MR) input sets all Q outputs Low, independent of any other input condition.