CM1450

• High bandwidth, high RF rejection filter array
• Six and eight channels of EMI filtering
• Utilizes Praetorian® inductor-based design technology for true L-C filter implementation
• OptiGuard™ coating for improved reliability
• ±15kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge)
• ±30kV ESD protection on each channel (HBM)
• Better than 40dB of attenuation at 1GHz
• Maintains signal integrity for signals that have a risetime and falltime as fast as 2ns
• Chip Scale Package features extremely low lead inductance for optimum filter and ESD performance
• 15-bump, 3.006mm x 1.376mm footprint
• Chip Scale Package (CM1450-06CS/CP)
• 20-bump, 4.006mm x 1.376mm footprint
• Chip Scale Package (CM1450-08CS/CP)
• Lead-free version available

The CM1450 comprises a family of inductor-capacitor (L-C) based EMI filter arrays with integrated ESD protection in a CSP form factor. The CM1450-06 and CM1450-08 are configured in 6 and 8 channel formats respectively. Each EMI filter channel of the CM1450 is implemented as a 5-pole L-C filter where the component values are 14pF-17nH-14pF-17nF-14pF. The CM1450&primes roll-off frequency at -10dB attenuation is 400MHz and can be used in applications where the data rates are as high as 160Mbps while providing greater than 35dB over the 800MHz to 2.7GHz frequency range. The parts integrate ESD protection diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes connected to the filter ports safely dissipate ESD strikes of ±15kV, exceeding the Level 4 requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV.

This device is particularly well-suited for portable electronics (e.g. wireless handsets, PDAs) because of its small package format and easy-to-use pin assignments. In particular, the CM1450 is ideal for EMI filtering and protecting data and control lines for the LCD display and camera interface in wireless handsets while maintaining the integrity of signals that have rise/fall times as fast as 2ns.

The CM1450 incorporates OptiGuard™ which results in improved reliability at assembly. The CM1450 is available in a space-saving, low-profile Chip Scale Package with optional lead-free finishing.

Note: Some of the devices listed here have suggested replacements available. Please see additional information at the end of this page.