COP8CCE9

Features:

KEY FEATURES
n 8k bytes Flash Program Memory with Security Feature
n Virtual EEPROM using Flash Program Memory
n 256byte volatile RAM
n 10-bit Successive Approximation Analog to Digital
Converter (up to 16 channels)
n 100% Precise Analog Emulation
n USART with onchip baud generator
n 2.7V 5.5V In-System Programmability of Flash
n High endurance -100k Read/Write Cycles
n Superior Data Retention - 100 years
n Dual Clock Operation with HALT/IDLE Power Save
Modes
n Two 16-bit timers:
- Timer T2 can operate at high speed (50 ns resolution)
- Processor Independent PWM mode
- External Event counter mode
- Input Capture mode
n Brown-out Reset (COP8CBE9/CCE9)
n High Current I/Os
- B0 B3: 10 mA @ 0.3V
- All others: 10 mA @ 1.0V
OTHER FEATURES
n Single supply operation:
- 2.7V5.5V (0˚C to +70˚C)
- 4.5V5.5V (−40˚C to +125˚C)
n Quiet Design (low radiated emissions)
n Multi-Input Wake-up with optional interrupts
n MICROWIRE/PLUS (Serial Peripheral Interface Compatible)
n Clock Doubler for 20 MHz operation from 10 MHz
Oscillator, with 0.5 µs Instruction Cycle
n Eleven multi-source vectored interrupts servicing:
- External Interrupt
- USART (2)
- Idle Timer T0
- Two Timers (each with 2 interrupts)
- MICROWIRE/PLUS Serial peripheral interface
- Multi-Input Wake-up
- Software Trap
n Idle Timer with programmable interrupt interval
n 8-bit Stack Pointer SP (stack in RAM)
n Two 8-bit Register Indirect Data Memory Pointers
n True bit manipulation
n WATCHDOG and Clock Monitor logic
n Software selectable I/O options
- TRI-STATE Output/High Impedance Input
- Push-Pull Output
- Weak Pull Up Input
n Schmitt trigger inputs on I/O ports
n Temperature range: 0˚C to +70˚C and 40˚C to +125˚C (COP8CCE9/CDE9)
n Packaging: 44 PLCC, 44 LLP and 48 TSSOP

Specifications

Temperature Min	-40 deg C
Temperature Max	85 deg C
Code Memory	8000 Bytes
Code Type	Flash
RAM Size Bytes	256 Bytes
I/O	37
Halt/Idle	Yes
Wakeup	Yes
TO Timer	Yes
Supply Min	4.5 Volt
Supply Max	5.5 Volt
Interrupts	13
Power on Reset	Yes
Watchdog/Clock Monitor	Yes
With A/D	10 bits
Interface Type	Microwire
USART Interface	Yes
CAN	No
With TempSensor	No
View Using Catalog

Supply Voltage (V_CC) 7V
Voltage at Any Pin −0.3V to V_CC +0.3V
Total Current into V_CC Pin (Source)200 mA
Total Current out of GND Pin (Sink) 200 mA
Storage Temperature Range −65˚C to +140˚C
ESD Protection Level 2 kV (Human Body Model)




Description

The COP8CBE9/CCE9 Flash microcontrollers are highly integrated COP8™ Feature core devices, with 8k Flash memory and advanced features including Virtual EEPROM, A/D, High Speed Timers, USART, and Brownout Reset. This single-chip CMOS device is suited for applications requiring a full featured, in-system reprogrammable controller with large memory and low EMI. The same device is used for development, pre-production and volume production with a range of COP8 software and hardware development tools.

Devices included in this datasheet:

Device	Flash ProgramMemory (bytes)	RAM (bytes)	BrownoutVoltage	Max Input Clock Frequency	I/OPins	Packages	Temperature
COP8CBE9	8k	256	2.7V to 2.9V	3.33 MHz	37,39	44 LLP, 44PLCC, 48 TSSOP	0°C to +70°C
COP8CCE9	8k	256	4.17V to 4.5V	10 MHz	37,39	44 LLP, 44PLCC, 48 TSSOP	0°C to +70°C -40°C to +125°C

Reliability Metrics

---

Part Number	Process	EFR Reject	EFR Sample Size	PPM	LTA Rejects	LTA Device Hours	FITS	MTTF (Hours)
COP8CCE9HVA7	.5	0	13425	0	0	932500	4	264599421
COP8CCE9IMT7	.5	0	13425	0	0	932500	4	264599421
COP8CCE9IMT7AWZ	.5	0	13425	0	0	932500	4	264599421
COP8CCE9IMT7CQL	.5	0	13425	0	0	932500	4	264599421
COP8CCE9IMT7XXX	.5	0	13425	0	0	932500	4	264599421
COP8CCE9IMT9	.5	0	13425	0	0	932500	4	264599421

Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

For more information on Reliability Metrics, please click here.

Design Tools

---

Title	Size in Kbytes	Date
Tools for Evaluation, Design, and Programming"	240 Kbytes	12-Apr-2002	View Online	Download

If you have trouble printing or viewing PDF file(s), see Printing Problems.

The COP8CBE9/CCE9/CDE9 Flash microcontrollers are highly integrated COP8™ Feature core devices, with 8k Flash memory and advanced features including Virtual EE- PROM, A/D, High Speed Timers, USART, and Brownout Reset. This single-chip CMOS device COP8CCE9 is suited for applica- tions requiring a full featured, in-system reprogrammable controller with large memory and low EMI. The same device is used for development, pre-production and volume produc- tion with a range of COP8 software and hardware develop- ment tools.