COP8SBR9

Features:

`32 kbytes Flash Program Memory with Security Feature
`Virtual EEPROM using Flash Program Memory
`1 kbyte volatile RAM
`USART with on chip baud generator
`2.7V5.5V In-System Programmability of Flash
`High endurance - 100k Read/Write Cycles
`Superior data retention - 100 years
`Dual Clock Operation with HALT/IDLE Power Save Modes
`Three 16-bit timers:
- Timers T2 and T3 can operate at high speed (50 ns resolution)
- Processor Independent PWM mode
- External Event counter mode
- Input Capture mode
`Brown-out Reset (COP8SBR9/SCR9)




Pinout






Specifications

Supply Voltage (V_CC) 7V
Voltage at Any Pin −0.3V to VCC +0.3V
Total Current into V_CC Pin (Source) 200 mA
Total Current out of GND Pin (Sink) 200 mA
Storage Temperature Range −65°C to +140°C
ESD Protection Level 2 kV (Human Body Model)

Temperature Min	-40 deg C
Temperature Max	85 deg C
Code Memory	32000 Bytes
Code Type	Flash
RAM Size Bytes	1000 Bytes
I/O	37
Halt/Idle	Yes
Wakeup	Yes
TO Timer	Yes
Supply Min	2.7 Volt
Supply Max	5.5 Volt
Interrupts	13
Power on Reset	Yes
Watchdog/Clock Monitor	Yes
Interface Type	Microwire
USART Interface	Yes
CAN	No
With TempSensor	No
View Using Catalog

Description

The COP8SBR9/SCR9/SDR9 Flash based microcontrollers are highly integrated COP8™ Feature core devices, with 32k Flash memory and advanced features including Virtual EEPROM, High Speed Timers, USART, and Brownout Reset.

This single-chip CMOS device COP8SBR9 is suited for applications requiring a full featured, in-system reprogrammable controller with large memory and low EMI. The same device is used for development, pre-production and volume production with a range of COP8 software and hardware development tools.