COP912C

Features:

` Lowest cost COP8 microcontroller
` 16-bit multi-function timer supporting
- PWM mode
- External event counter mode
- Input capture mode
` 768 bytes of ROM
` 64 bytes of RAM




Application

· Electronic keys and switches
· Remote Control
·Timers
·Alarms
·Small industrial control units
· Low cost slave controllers
·Temperature meters
·Small domestic appliances
·Toys and games




Pinout






Specifications

Code Memory	768 Bytes
Code Type	ROM
RAM Size Bytes	64 Bytes
I/O	15
Halt/Idle	Yes
Wakeup	No
TO Timer	No
Supply Min	2.5 Volt
Supply Max	6 Volt
Interrupts	3
Interface Type	Microwire
USART Interface	No
View Using Catalog

Supply Voltage (V_CC)6.0V
Voltage at Any Pin −0.3V to V_CC +0.3V
Total Current into VCC Pin (Source) 80 mA
Total Current out of GND Pin (Sink) 80 mA
Storage Temperature Range−65 to +150

Description

COP8SA devices are instruction set and pinout compatible supersets of the COP912C devices, and are replacements for these in new designs when possible.
The COP912C ROM based microcontrollers are integrated COP8(tm) Base core devices with smaller memory (768 bytes), and fewer on-board features. These single-chip CMOS devices are suited for lower-functionality applications where system cost is of prime consideration. Pin and software compatible (different Vcc range) 4k/32k OTP versions are available (COP87LxxCJ/RJ Family). Erasable windowed versions are available for use with a range of COP8(tm) software and hardware development tools.
COP912C Family features include an 8-bit memory mapped architecture, 10MHz CKI with 2.5us(912C) or 2us(912CH) instruction cycle, one multi-function 16-bit timer/counter with PWM, MICROWIRE/PLUS(tm) serial I/O, power saving HALT mode, three clock modes, high current outputs, software selectable I/O options, multi-volt operation and 20 pin packages.
Devices included in this datasheet are: