CS52015-3

Features:

·Output Current to 1.5A
·Output Accuracy to ±1.5% Over Temperature
·Dropout Voltage (typical) 1.05V @ 1.5A
·Fast Transient Response
·Fault Protection Current Limit Thermal Shutdown


Pinout




Specifications

Supply Voltage, V_IN....................................................................................................7V
Operating Temperature Range...................................................................-40¡C to 70
Junction Temperature ............................................................................................150
Storage Temperature Range ...................................................................-60¡C to 150
Lead Temperature Soldering Wave Solder (through hole styles only).....10 sec. max, 260 peak
Reflow (SMD styles only) ....................................................60 sec. max above 183, 230 peak
ESD Damage Threshold............................................................................................2kV


Description

The CS52015-3 linear regulator provides 1.5A at 3.3V with an output voltage accuracy of ±1.5%.

The regulator CS52015-3 is intended for use as a post regulator and microprocessor supply. The fast loop response and low dropout voltage make this regulator ideal for applications where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages less than 1.4V at 1.5A output current. The maximum quiescent current is only 10mA at full load. Device protection includes overcurrent and thermal shutdown.

The CS52015-3 is pin compatible with the LT1086 family of linear regulators but has lower dropout voltage.

The regulator CS52015-3 is available in TO- 220, surface mount D2, and SOT-223 packages.