CS5421

• V² Control Topology
• 150 ns Transient Response
• Programmable Soft Start
• 25 ns Gate Rise and Fall Times (with 1.0 nF load)
• 40 ns Adaptive FET Nonoverlap Time
• 100% Duty Cycle for Enhanced Transient Response
• Internal Slope Compensation
• 1.0 V 0.8% and 2.0% Error Amplifier References
• 150 kHz to 750 kHz Programmable Frequency Operation
• Switching Frequency Set by Single Resistor
• OutOfPhase Synchronization Between the Channels Reduces the
Input Filter Requirement
• Undervoltage Lockout
• On/Off Control Through Use of the COMP Pins

1. 60 second maximum above 183.
*The maximum package power dissipation must be observed.

The CS5421 is a dual Nchannel synchronous buck regulator controller. It contains all the circuitry required for two independent buck regulators and utilizes the V2] control method to achieve the fastest possible transient response and best overall regulation, while using the least number of external components. The CS5421 features outofphase synchronization between the channels, reducing the input filter requirement. The CS5421 also provides undervoltage lockout, Soft Start, built in adaptive FET nonoverlap and remote sense capability. The part is available in a 16 Lead SO Narrow package allowing the designer to minimize solution size.