CY74FCT16823T

Features:

• FCT-E speed at 4.4 ns
• Power-off disable outputs permits live insertion
• Edge-rate control circuitry for significantly improved noise characteristics
• Typical output skew < 250 ps
• ESD > 2000V
• TSSOP (19.6-mil pitch) and SSOP (25-mil pitch) packages
• Industrial temperature range of -40°C to +85°C
• V_CC = 5V ± 10%
CY74FCT16823T Features:
• 64 mA sink current, 32 mA source current
• Typical VOLP (ground bounce) <1.0V at V_CC = 5V, T_A = 25°C
CY74FCT162823T Features:
• Balanced 24 mA output drivers
• Reduced system switching noise
• Typical VOLP (ground bounce) <0.6V at V_CC = 5V, T_A= 25°C


Pinout




Specifications

Storage Temperature................................................................-55°C to +125°C
Ambient Temperature with Power Applied ................................-55°C to +125°C
DC Input Voltage..............................................................................-0.5V to +7.0V
DC Output Voltage ...........................................................................-0.5V to +7.0V
DC Output Current Maximum Sink Current/Pin) ..............................-60 to +120 mA
Power Dissipation ...........................................................................................1.0W
Static Discharge Voltage..............................................................................>2001V


Description

The CY74FCT16823T and the CY74FCT162823T 18-bit bus interface registers are designed for use in high-speed, low-power systems needing wide registers and parity. 18-bit operation is achieved by connecting the control lines of the two 9-bit registers. Flow-through pinout and small shrink packaging aids in simplifying board layout. The outputs of CY74FCT16823T are designed with a power-off disable feature to allow live insertion of boards.
The CY74FCT16823T is ideally suited for driving high-capacitance loads and low-impedance backplanes.
The CY74FCT162823T has 24-mA balanced output drivers with current limiting resistors in the outputs. CY74FCT16823T reduces the need for external terminating resistors and provides for minimal undershoot and reduced ground bounce. The CY74FCT162823T is ideal for driving transmission lines.