CYP15G0401DXB General Description
CYP15G0401DXB Maximum Ratings
Storage Temperature ..................................65°C to +150°C
Ambient Temperature with Power Applied...55°C to +125°C
Supply Voltage to Ground Potential ............... 0.5V to +3.8V
DC Voltage Applied to LVTTL Outputs
in High-Z State .......................................0.5V to VCC + 0.5V
Output Current into LVTTL Outputs (LOW)....................60 mA
DC Input Voltage.....................................0.5V to VCC + 0.5V
Static Discharge Voltage.......................................... > 2000 V
(per MIL-STD-883, Method 3015)
Latch-up Current..................................................... > 200 mA
CYP15G0401DXB Features
• Quad channel transceiver for 195 to 1500 MBaud serial signaling rate
-Aggregate throughput of 12 GBits/second
• Second-generation HOTLink® technology
• Compliant to multiple standards
-ESCON, DVB-ASI, Fibre Channel and Gigabit Ethernet (IEEE802.3z)
-CYV15G0401DXB also compliant to SMPTE 259M and SMPTE 292M
-8B/10B encoded or 10-bit unencoded data
• Selectable parity check/generate
• Selectable multi-channel bonding options
-Four 8-bit channels
-Two 16-bit channels
-One 32-bit channel
-N x 32-bit channel support (inter-chip)
• Skew alignment support for multiple bytes of offset
• Selectable input/output clocking options
• MultiFrame™ Receive Framer
-Bit and Byte alignment
-Comma or full K28.5 detect
-Single- or multi-byte framer for byte alignment
-Low-latency option
• Synchronous LVTTL parallel interface
• Optional Elasticity Buffer in Receive Path
• Optional Phase Align Buffer in Transmit Path
• Internal phase-locked loops (PLLs) with no external PLL components
• Dual differential PECL-compatible serial inputs per channel
-Internal DC-restoration
• Dual differential PECL-compatible serial outputs per channel
-Source matched for 50Ω transmission lines
-No external bias resistors required
-Signaling-rate controlled edge-rates
• Compatible with
-fiber-optic modules
-copper cables
-circuit board traces
• JTAG boundary scan
• Built-In Self-Test (BIST) for at-speed link testing
• Per-channel Link Quality Indicator
-Analog signal detect
-Digital signal detect
• Low power 2.5W @ 3.3V typical
• Single 3.3V supply
• 256-ball thermally enhanced BGA
• 0.25µ BiCMOS technology
Map list: ABCDEFGHIJKLMNOPQRSTUVWXYZ 0123456789All