Purchase DG411F, In-stock DG411F From SeekIC.
Part Number: DG411F
Description: The DG411F/DG412F/DG413F are quad, single-pole/single- throw (SPST), fault-protected analog switches. ...
- Table of contents:
DG411F
-
Suppliers
DataSheet
General Description
DG411F General Description
The DG411F/DG412F/DG413F are quad, single-pole/single- throw (SPST), fault-protected analog switches. They are pin compatible with the industry-standard nonprotected DG411/DG412/DG413. These new switches feature fault-protected inputs and Rail-to-Rail®signalhandling capability. All terminals are protected from overvoltage faults up to ±36V with power on and up to ±40V with power off. During a fault condition, the COM, NO, or NC terminal becomes an open circuit and only microamperes of leakage current flow from the source. On-resistance is 35 (max) and is matched between switches to 1.5 (max) at +25°C.
The DG411F has four normally closed (NC) switches. The DG412F has four normally open (NO) switches. The DG413F has two NC and two NO switches. These CMOS switches operate with dual power supplies ranging from ±4.5V to ±20V or a single supply between +9V and +36V. All digital inputs have +0.8V and +2.4V logic thresholds, ensuring both TTL and CMOS logic compatibility when using ±15V or a single +12V supply.
For supply voltages of ±5V, +5V, and +3V, refer to the MAX4711/MAX4712/MAX4713 data sheet.
DG411F Maximum Ratings
(Voltages Referenced to GND)
V+...........................................................................-0.3V to +44V
V- ...........................................................................-44V to +0.3V
V+ to V-..................................................................-0.3V to +44V
IN_ ......................................................... (V- - 0.3V) to (V- + 40V)
NO_, NC_ to COM_ (Note1) ................................... -40V to +40V
COM_, NO_, NC_ Voltage with
Power On (Note 1)................................................. -36V to +36V
COM_, NO_, NC_ Voltage with
Power Off (Note 1)................................................. -40V to +40V
Continuous Current (any terminal) ................................ ±30mA
Peak Current COM_, NO_, NC_
(pulsed at 1ms, 10% duty cycle) ...................................±100mA
Continuous Power Dissipation (TA = +70°C)
16-Pin TSSOP (derate 9.4mW/°C above +70°C) ......... 755mW
16-Pin SO (derate 8.7mW/°C above +70°C).................696mW
16-Pin Plastic DIP (derate 10.53mW/°C
above +70°C) ............................................................... 842mW
Operating Temperature Range ....................... -40°C to +85°C
Junction Temperature ................................................... +150°C
Storage Temperature Range ......................... -65°C to +160°C
Lead Temperature (soldering, 10s) ............................... +300°C
Note 1: COM_, NO_, and NC_ pins are fault protected. Signals on COM_, NO_, and NC_ exceeding -36V to +36V may damage the device during power-on conditions. When the power is off, the maximum range is -40V to +40V.
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
DG411F Features
` No Power-Supply Sequencing Required
` Rail-to-Rail Signal Handling
` All Switches Off with Power Off
` All Switches Off when V+ is Off and V- is On
` ±40V Fault Protection with Power Off
` ±36V Fault Protection with ±15V Supplies
` Control Line Fault Protection from V- - 0.3V to V- + 40V
` Pin Compatible with Industry-Standard DG411/DG412/DG413
` 20ns (typ) Fault Response Time
` 35 (max) RON with ±15V Supplies
` ±4.5V to ±20V Dual Supplies
` +9V to +36V Single Supply
` TTL- and CMOS-Compatible Logic Inputs with ±15V or Single +9V to +15V Supplies
` Rail-to-Rail Signal Handling
` All Switches Off with Power Off
` All Switches Off when V+ is Off and V- is On
` ±40V Fault Protection with Power Off
` ±36V Fault Protection with ±15V Supplies
` Control Line Fault Protection from V- - 0.3V to V- + 40V
` Pin Compatible with Industry-Standard DG411/DG412/DG413
` 20ns (typ) Fault Response Time
` 35 (max) RON with ±15V Supplies
` ±4.5V to ±20V Dual Supplies
` +9V to +36V Single Supply
` TTL- and CMOS-Compatible Logic Inputs with ±15V or Single +9V to +15V Supplies
DG411F Typical Application
·Communication Systems
·Signal Routing
·Test Equipment
·Data Acquisition
·Industrial and Process Control Systems
·Avionics
·Redundant/Backup Systems
·Signal Routing
·Test Equipment
·Data Acquisition
·Industrial and Process Control Systems
·Avionics
·Redundant/Backup Systems
DG411F Connection Diagram
DG411F
PDF/DataSheet Download
- Datasheet: DG411F
- File Size: 444941 KB
- Manufacturer: Maxim
- Click here to Download
- ·DG401
- INTERSIL [Intersil Corporation]
- Monolithic CMOS Analog Switches
- 94431 KB
- ·DG401/883
- INTERSIL [Intersil Corporation]
- Monolithic CMOS Analog Switches
- 298247 KB
- ·DG401883
- INTERSIL [Intersil Corporation]
- Monolithic CMOS Analog Switches
- 298247 KB
- ·DG401AK
- MAXIM [Maxim Integrated Products]
- Improved, Dual, High-Speed Analog Switches
- 94431 KB
- ·DG401AK/883
- INTERSIL [Intersil Corporation]
- Monolithic CMOS Analog Switches
- 298247 KB
- ·DG401AZ
- MAXIM [Maxim Integrated Products]
- Improved, Dual, High-Speed Analog Switches
- 94431 KB
- ·DG401C/D
- MAXIM [Maxim Integrated Products]
- Improved, Dual, High-Speed Analog Switches
- 94431 KB
- ·DG401CJ
- MAXIM [Maxim Integrated Products]
- Improved, Dual, High-Speed Analog Switches
- 94431 KB
DG411F Relative Products
Hotspot Suppliers Product
74HC573D
Price: 0.085-0.1 USD
high-speed, 20SOIC, octal D-type transparent latches, 3-state, -0.5 to +7 V
BTS723GW
Price: 2.9-3.8 USD
MOSFET, SOP14, 42V
RFPA2189
Price: 1.4-1.8 USD
single-stage GaAs HBT, power amplifier, 0.5W, 400MHz to 2700MHz, SOT-89
IRF9640
Price: 0.34-0.58 USD
Power MOSFET, TO-220AB, Dynamic dV/dt Rating, Fast Switching, Lead (Pb)-free Available
SST39SF020A-70-4C-NHE
Price: 0.65-0.95 USD
PLCC44, 14 MHz, multi-purpose flash, MPF, Fast Erase, Byte Program, 100 mA
MCD162-08IO1
Price: 5-35 USD
diode module, International standard package, Planar passivated chips
BA33DD0WHFP-TR
Price: 1.78-2.89 USD
low-saturation regulator, TO-252, -0.3～+35 V, 2000 mW, 2A
PCF8576DT
Price: 0.55-0.6 USD
Universal LCD driver, QFP, Low power consumption, -0.5 to +6.5V supply voltage, -10 to +10mA input...
PGA206UA
Price: 5-5.5 USD
digitally programmable gain instrumentation amplifier, SOP16, excellent system efficiency, 1.5mV, ...
MLF1608A3R3KT
Price: 0.1-100 USD
inductor MLF, general applications SMD, High reliability, high heat resistance, High reliability
LXT905LC
Price: 1.9-2.5 USD
SMPS, QFP, 70 mA
SST25VF010A-33-4C-SAE
Price: 0.01-9.9 USD
1 Mbit SPI Serial Flash, TSOP, Single 2.7-3.6V Read and Write Operations, 33 MHz Max Clock Frequency
