DLT1040

The DLT1040 is designed as fiber optic data link transmitter. It is high performance cost efficient modules for serial optical data communications applications with data rates up to 125Mbd. Its typical applications include FDDI concentrators, bridges, routers&gateways, local area networks, point to point data communications.

It has five features. (1)Fuil FDDI. (2)Single +5V power supply. (3)Compact ST connectorized 16-pin DIP package. (4)Pin compatible with ODL125. Those are all the main features.

Some absolute maximum ratings have been concluded into several points as follow. (1)Its storage temperature range would be from -40°C to +85°C. (2)Its lead soldering temperature /time would be 240°C for 10 seconds. (3)Its Vbb output current would be min -1mA and max +1mA. (4)Its output current (other outputs) would be min 0mA and max 30mA. (5)Its input voltage would be min Vee and max Vcc. (6)Its power supply voltage would be min 0V and max 6V. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics are concluded as follow. (1)Its output center wavelength would be min 1270nm and typ 1300nm and max 1380nm. (2)Its output spectral width would be typ 80nm and max 120nm. (3)Its optical output power would be min -19dBm and typ -15.5dBm and max -14dBm for commercial and would be min -23dBm and typ -16.5dBm and max -14dBm for industrial. (4)Its optical rise and fall time would be min 0.6ns and typ 2ns and max 3.5ns. (5)Its duty cycle distortion would be max 0.6ns. (6)Its extinguished optical power would be min 0nW and max 30nW. (7)Its input sensitivity would be typ 100mV and max 300mV. (8)Its input current high would be typ 50uA. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!