DM74LS273WM

The DM74LS273WM  is designed as a high speed 8-bit register, consisting of eight D-type flip-flops with a common clock and an asynchronous active low master reset. This device is supplied in a 20-pin package featuring 0.3 inch row spacing.

DM74LS273WM has four features. (1)Edge-triggered. (2)8-bit high speed register. (3)Parallel in and out. (4)Common clock and master reset. Those are all the main features.

Some absolute maximum ratings of DM74LS273WM have been concluded into several points as follow. (1)Its supply voltage would be 7V. (2)Its input voltage would be 7V. (3)Its operating free-air temperature range would be from 0°C to 70°C. (4)Its storage temperature range would be from -65°C to 150°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of DM74LS273WM  are concluded as follow. (1)Its input clamp voltage would be max -1.5V. (2)Its high level output voltage would be min 2.7V and typ 3.4V. (3)Its low level output voltage would be typ 0.35V and max 0.5V at Iol=max and would be typ 0.25V and max 0.4V at Iol=4mA. (4)Its input current at max input voltage would be max 0.1mA. (5)Its high level input current would be max 20mA. (6)Its low level input current would be max -0.4mA. (7)Its short circuit output current would be min -20mA and max -100mA. (8)Its supply current would be max 27mA. (9)Its maximum clock frequency would be min 30MHz. (10)Its propagation delay CP to Qn would be max 24ns. (11)Its propagation delay /MR to Qn would be max 27ns for tPLH. (12)Its recommended supply voltage would be min 4.75V and typ 5V and max 5.25V. (13)Its recommended free air operating temperature range would be from 0°C to 70°C. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!