DS26LS31C General Description
The DS26LS31 is a quad differential line driver designed for digital data transmission over balanced lines. The DS26LS31 meets all the requirements of EIA Standard RS- 422 and Federal Standard 1020. It is designed to provide unipolar differential drive to twisted-pair or parallel-wire transmission lines.
The circuit provides an enable and disable function common to all four drivers. The DS26LS31 features TRI-STATE ® outputs and logically ANDed complementary outputs. The inputs are all LS compatible and are all one unit load.
DS26LS31C Maximum Ratings
Supply Voltage 7V
Input Voltage 7V
Output Voltage 5.5V
Output Voltage (Power OFF) −0.25 to 6V
Maximum Power Dissipation (Note 1) at 25
Cavity Package 1509 mW
Molded DIP Package 1476 mW
SO Package 1051 mW
DS26LS31C Features
Output skew-2.0 ns typical
Input to output delay-10 ns typical
Operation from single 5V supply
Outputs won't load line when VCC = 0V
Four line drivers in one package for maximum package density
Output short-circuit protection
Complementary outputs
Meets the requirements of EIA Standard RS-422
Pin compatible with AM26LS31
Available in military and commercial temperature range
Map list: ABCDEFGHIJKLMNOPQRSTUVWXYZ 0123456789All