MFG:Dallas Package Cooled:IBACC D/C:8
MFG: Dallas
Package Cooled: IBACC
D/C: 8
Description: The DS9093F plastic snap-in fob offers the simplest way to mount an iButton for applications that requ...
The DS9093F plastic snap-in fob offers the simplest way to mount an iButton for applications that require only momentary contact. The fob can be attached to a key ring for carrying. Do not apply solvents or adhesives to this fob. This might affect the mechanical strength and reliability.
The DS9093N angled fob is an alternate way to mount an iButton for applications that require only momentary contact. Due to the different mounting technique, the DS9093N can be used with the F5 MicroCan only. The iButton is inserted into this fob by press-fitting. For permanent mount, the iButton can be locked by a DS9093RA Lock Ring.
The DS9093A is very similar to the DS9093N. It has about the same size as the DS9093N and can be used with the F5 MicroCan only. The iButton is inserted by press-fitting the flange of the MicroCan into the cavity of the fob. In contrast to the DS9093N, no additional parts are needed for permanent mounting.
The DS9093A is available in black, blue, green, red, and yellow.
· Low-cost key ring mounts that hold an iButton® for thumbpad applications.
· Key ring mount versions:
· DS9093A snap-in angled fob for use with F5 MicroCan®.
· DS9093F snap-in fob for use with F5 MicroCan.
· DS9093N angled fob for use with F5 MicroCan.
· DS9093A is available in the following colors other than standard black. When ordering, please note that there is a separate part number per color.
· DS9093A = Black
· DS9093A-B = Blue
· DS9093A-Y = Yellow
· DS9093A-R = Red
· DS9093A-G = Green
DS9093A
PDF/DataSheet Download
IBTN PROBE W/TACTILE FEEDBACK
The DS9092R iButton Port provides the electrical contact necessary for mating remotely located iButtons or other 1-Wire MicroLAN devices with reader/writers. The iButton port is available with groove (DS9092RG) and without (DS9092R). For applications where o...
IBUTTON PROBE PANEL MOUNT W/LED
The DS9092K iButton Starter Kit provides basic hardware and software for a quick evaluation of Dallas Semiconductor's iButton family, using an IBM-compatible computer. The kit includes iButtons and demonstration software to easily communicate with iButtons a...
IBUTTON PROBE CONTACT ANGLED
IBUTTON PROBE CONTACT PARALLEL
Price: 0.5-0.7 USD
glass passivated PNPN device, 16A, 600V, TO-220AB, BTA16-600B
Price: 1-2 USD
8-bit, microcontroller, plcc, +7.0 V, 64 KB, EMI reduction mode, Eight sources
Price: 2-5 USD
GT-48300-B-1, BGA, 1.5V to 6V, 6W, GalileoTechnology
Price: 1-1 USD
256 Mbit Double-Data-Rate SDRAM, BGA, –1 to +3.6 V, 1.5W, 50mA, Double data rate architecture
Price: 6.8-7 USD
ultralow offset voltage, operational amplifier, CDIP8
Price: 65-86 USD
hybrid power module, 1600V, 25A, UL Recognition Pending, Short Circuit Rated
Price: 3.6-5 USD
N-Channel, Enhancement-Mode Lateral MOSFET, 28V, 4W, -0.5 to +68 Vdc
Price: 0.25-0.5 USD
Tantalum Surface Mount Capacitor, 0.1uF, 50V, 10%, SMD, RoHS Compliant
Price: 1-1.7 USD
Consumer Memory, BGA, 4K/32m Refresh, 2.5V±5% Power
Price: 1-1 USD
power diode module, 1600V, 100A, High surge current capability, High reliable
Price: 90-100 USD
DC-DC Converter Module, -0.5 to +375 Vdc, 100ms
Price: 0.32-0.8 USD
high speed, 130MHz, buffer, SOP-8
