E910.15

Pinout




Specifications

• K-Bus Interface applicable as diagnostic interface to ISO 9141 and OBD II
• Change between LIN-mode and K-mode with external pin
• Data rate up to 9.600Baud for K-mode
• Data rate up to 20kBaud for LIN-mode
• Very low standby current (15A typical)
• Output driver with slewrate control (EMI)
• Supply voltage range VS 6V to 18V
• Logic supply voltage range VDD 4.5V to 5.5V
• Internal monitoring features
• Bus input voltage excursion from  24V to + 30V (independent of VS)
• Over temperature protection
• Load-dump and jump-start protected
•  40C to + 125C operating temperature
• SO8 and SO14 package

Description

The E910.15 IC is designed to control bidirectional serial data transmission on bus lines. It supports both LIN- and K-Bus which are selected by the MODE pin. This feature allows an easy migration from K- to LIN-bus without changing the transceiver.

The E910.15 high voltage range and the low standby current as well as the wide temperature range make the IC interesting for a wide field of applications.

An implemented over temperature protection disables the bus driver to prevent damages. Bus voltage excursions from  24V to + 30V ensures easy board protection.