E910.41

Pinout




Specifications

• Supply voltage range VS 5.25 to 25V
• Supply voltage range VDD 4.75 to 5.25V
• Maximum overvoltage protection up to 40V
• Low standby current (typical IS = 13A)
• Contact status monitoring by comparison of the switch resistance
  with internal reference
• Inputs are current limited
• High noise immunity
• Overtemperatur protected
•  40C to + 125 C operating temperature   
• SO20 package

Description

The E910.41 IC is developed for automotive applications. It continuously
monitors up to 8 hall sensors or switches to GND.

The E910.41 input currents are compared to internal references. Currents
exceeding  11mA will force a logic 0 at the output, while currents higher than -6mA will result in a logic 1 at the output.

If the E910.41 IC is used to monitor switches, the switch resistance must be higher than 5kΩ for 1 and less than 330Ω for 0 at the output.

The E910.41 input current as well as the tristate driver are activated with the enable pin. Due to the tristate outputs the IC can be used in bus configuration.