EL2176

Voltage between VS+ and VS- . . . . . . . . . . . . . . . . . . . . .... . . . +12.6V
Common-Mode Input Voltage . . . . . . . . . . . . . . . . . . ...... . . VS- to VS+
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . ... . . .±6V
Current into +IN or -IN . . . . . . . . . . . . . . . . . . . . . . . . . . ... . . .±7.5mA
Internal Power Dissipation . . . . . . . . . . . . . . . . . . . ..... . . . See Curves
Operating Ambient Temperature Range . . . . . . . . . .. -40°C to +85°C
Operating Junction Temperature Plastic Packages . . . . . . .... . . 150°C
Output Current (EL2176) . . . . . . . . . . . . . . . . . . . . . . . . .... . . ±120mA
Output Current (EL2276) . . . . . . . . . . . . . . . . . . . . . . . . .... . . . ±60mA
Storage Temperature Range . . . . . . . . . . . . . . . . . . -65°C to +150°C
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

The EL2176/EL2276 are single/dual current-feedback operational amplifiers which achieve a -3dB bandwidth of 70MHz at a gain of +1 while consuming only 1mA of supply current per amplifier. They will operate with dual supplies ranging from ±1.5V to ±6V, or from single supplies ranging from +3V to +12V. The EL2176/EL2276 also include a disable/power-down feature which reduces current consumption to 0mA while placing the amplifier output in a high impedance state. In spite of its low supply current, the EL2276 can output 55mA while swinging to ±4V on ±5V supplies. The EL2176 can output 100mA with similar output swings. These attributes make the EL2176/EL2276 excellent choices for low power and/or low voltage cabledriver, HDSL, or RGB applications.

For Single, Dual and Quad applications without disable, consider the EL2170 (8-Pin Single), EL2270 (8-Pin Dual) or EL2470 (14-Pin Quad). For higher bandwidth applications where low power is still a concern, consider the EL2180/EL2186 family which also comes in similar Single, Dual and Quad configurations. The EL2180/EL2186 family provides a -3dB bandwidth of 250MHz while consuming 3mA of supply current per amplifier.