EPM570F256I5N

Programmable Type: In System Programmable
Number of Gates: -
Mounting Type: Surface Mount
Packaging: Tray
Operating Temperature: -40°C ~ 100°C
Manufacturer: Altera
Series: MAX® II
Voltage Supply - Internal: 2.5V, 3.3V
Number of Logic Elements/Blocks: 570
Number of Macrocells: 440
Delay Time tpd(1) Max: 5.4ns
Number of I /O: 160
Package / Case: 256-BGA
Supplier Device Package: 256-FBGA (17x17)


Description

The EPM570F256I5N is designed as one member of the MAX family of instant-on, non-volatile CPLDs which is based on a 0.18um, 6-layer-metal-flash process, with densities from 240 to 2210 logic elements (LEs) (128 to 2210 equivalent macrocells) and non-volatile storage of 8Kbits. MAX II devices offer high I/O counts, fast performance, and reliable fitting versus other CPLD architectures.

EPM570F256I5N has many features. (1)Low-cost, low-power CPLD. (2)Instant-on, non-volatile architecture. (3)Standby current as low as 2mA. (4)Provides fast propagation delay and clock-to-output times. (5)Provides four global clocks with two clocks available per logic array
block (LAB). (6)UFM block up to 8 Kbits for non-volatile storage. (7)MultiVolt core enabling external supply voltages to the device of either 3.3V/2.5V or 1.8V. (8)MultiVolt I/O interface supporting 3.3V, 2.5V, 1.8V, and 1.5V logic levels. (9)Bus-friendly architecture including programmable slew rate, drive strength, bus-hold, and programmable pull-up resistors. (10)Schmitt triggers enabling noise tolerant inputs (programmable per pin). And so on.

Some absolute maximum ratings of EPM570F256I5N have been concluded into several points as follow. (1)Its internal supply voltage would be min -0.5V and max 4.6V. (2)Its I/O supply voltage would be min -0.5V and max 4.6V. (3)Its DC input voltage would be min -0.5V  and max 4.6V. (4)Its DC output current per pin would be min -25mA and max 25mA. (5)Its storage temperature range would be from -65°C to 150°C. (6)Its ambient temperature range would be from -65°C to 135°C. (7)Its junction temperature would be max 135°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of EPM570F256I5N are concluded as follow. (1)Its input pin leakage current would be min -10uA and max 10uA. (2)Its tri-stated I/O pin leakage current would be min -10uA and max 10uA. (3)Its hysteresis for schmitt trigger input would be typ 400mV at Vccio=3.3V and would be typ 190mV at Vccio=2.5V. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!

Parameters:

Technical/Catalog Information	EPM570F256I5N
Vendor	Altera
Category	Integrated Circuits (ICs)
Programmable Type	In System Programmable
Number of Macrocells	440
Number of I /O	160
Number of Logic Blocks/Elements	570
Operating Temperature	-40°C ~ 100°C
Package / Case	256-FBGA
Features	-
Voltage	2.5V, 3.3V
Memory Type	FLASH
Delay Time tpd(1) Max	5.4nS
Packaging	Tray
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	EPM570F256I5N EPM570F256I5N 544 1399 ND 5441399ND 544-1399