EPS40EXP

Model shall be EPS10EXP or EPS40EXP or EPS120EXP pressure type waterfl ow switch as manufactured by System Sensor of St. Charles, IL. They shall be installed on the sprinkler system with connection as shown on the drawings and/or as specifi ed herein. Pressure switches shall be of the bellows activated type. Switches shall have a maximum service rating of 250 psi and shall be factory adjusted to operate at a pressure as follows: EPS10EXP: 4 to 8 psi, EPS40EXP: 10 to 100 psi, EPS120EXP: 10 to 200 psi. There shall be two (2) contacts rated at 10.0 A @ 125/250 VAC and 2.5 A @ 6/12/24 VDC. The contractor shall furnish and install, where indicated on the plans, pressure switches according to appropriate NFPA standards. Switches shall be provided with ½˝ NPT male connection to be connected into the air supply line on the system side of any shut-off valve. Switches shall provide one (1) knockout type and one (1) open hole for ½˝ conduit fi tting attachment and a ground screw provision for electrical grounding. The switch enclosure shall be weatherproof and carry a NEMA 4 rating when used with proper electrical fi ttings and conduit. The cover shall incorporate a tamper-resistant screw. Switches shall be listed by Underwriters Laboratories. It shall be rated for use in hazardous locations classifi ed as Class I, Division 1, Groups B, C, D; Class II, Division 1, Groups E, F, G; Class III, Division 1.