Features: Intergrated Half-Bridge MOSFETs Floating Channel Designed for Bootstrap Operation to +600V. Low Start-up and Operating Current : 120A, 2.7mA Under Voltage Lock Out with 2V of Hysteresis Adjustable Run Frequency and Preheat Time Internal Adaptable ZVS Control Internal Protection Function...
FAN7710: Features: Intergrated Half-Bridge MOSFETs Floating Channel Designed for Bootstrap Operation to +600V. Low Start-up and Operating Current : 120A, 2.7mA Under Voltage Lock Out with 2V of Hysteresis A...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter |
Symbol |
Value |
Unit | |
High Side Floating Supply |
VB |
-0.3 to 625 |
V | |
High side floating supply return |
VS |
-0.3 to 600 | ||
Supply Voltage |
VDD |
15 | ||
RT,CPH Pins Input Voltage |
VIN |
-0.3 to 6 | ||
Allowable Offset Voltage Slew Rate |
dVS/dt |
50 |
V/ns | |
Operating Temperature Range |
Topr |
-25 to 125 |
°C | |
Storage Temperature Range |
Tstg |
-65 to 150 | ||
Power Dissipation |
8-DIP |
Pd |
W | |
Thermal Resistance (Junction-to-Air) |
8-DIP |
Rja |
°C/W |
Caution:
You must not supply a low impedance voltage source to the internal clamping zener diode that is between the GND
and the VDD pin of this device.
Product | Product status | Eco Status | Pricing* | Package type | Leads | Packing method | Package Drawing | Package Marking Convention** |
---|---|---|---|---|---|---|---|---|
FAN7710N | Full Production | RoHS Compliant | $1.94 | DIP | 8 | RAIL | TBD | Line 1: FAN7710 Line 2: &E&Z&3 |
* Fairchild 1,000 piece Budgetary Pricing |
** A sample button will appear if the part is available through Fairchild's on-line samples program. If there is no sample button, please contact a Fairchild distributor to obtain samples |
Package marking information for product FAN7710 is available. Click here for more information . |
The FAN7710 provides simple and high performance for CFL electronic ballast control. FAN7710 is optimized for CFL ballast up to 20W requiring a minimum board area, reduced component count and low power dissipation. The FAN7710 contains two power MOSFETs, in the classical half-bridge topology, ensuring all the features needed to drive and properly control a fluorescent lamp. A dedicated timing section in the FAN7710 allows the user set the necessary parameters for proper preheat and ignition of the lamp