FH27-10S-0.4SH

1. Low profile, small PCB mounting area, weight reduction
Protruding only 1.2 mm above the board the connector occupies 50% less area than comparable type having contacts spaced on 0.5 mm centers. Creative design, coupled with high manufacturing capabilities resulted in extremely low weight of the connector.
2. Higher current carrying capacity
Contact spacing of 0.4 mm allows production of wider and simpler pattern of conductive traces on FPC.
3. FPC temporary hold and verification of correct insertion
The connector has built-in FPC hold protrusions allowing the tactile feel of the correct FPC insertion and holding it in position before closing of the actuator.
4. Uses standard 0.2 mm thick FPC
5. One-finger operation of the actuator
Proven (in several other Hirose's connectors!) Flip-Lock rotating actuator assures reliable mechanical and electrical connection with FPC, confirming it with a definite tactile feel.
6. Board placement with automatic equipment
Flat top surface and packaging on the tape-and reel allows the use of vacuum nozzles. Standard reel contains 2,500 connectors.
7. Environmental considerations
The center cores of the embossed tape reels are made of Styrofoam.
8. Variety of contact positions
Available with 10, 40, 54, 57 and 60 pos.