FOD2200

Current Transfer Ratio :
Maximum Input Diode Current :
Maximum Reverse Diode Voltage : 5 V
Maximum Forward Diode Voltage : 1.7 V
Packaging : Bulk
Maximum Operating Temperature : + 85 C
Minimum Operating Temperature : 0 C
Maximum Power Dissipation : 150 mW
Package / Case : PDIP-8
Maximum Baud Rate : 2.5 MBps


Features:

• 1 kV/s Minimum Common Mode Rejection
• Compatible with LSTTL, TTL, and CMOS Logic
• Wide V_CC Range (4.5 to 20 V)
• 2.5 Mbd Guaranteed over Temperature
• Low Input Current (1.6 mA)
• Three State Output (No Pullup Resistor Required)
• Guaranteed Performance from 0°C to 85°C
• Hysteresis
• Safety Approvals Pending UL, CSA, VDE
• V_ISO = 5kVRMS




Application

• Isolation of High Speed Logic Systems
• Computer-Peripheral Interfaces
• Microprocessor System Interfaces
• Ground Loop Elimination
• Pulse Transformer Replacement
• Isolated Buss Driver
• High Speed Line Receiver




Pinout






Specifications

Parameter	Symbol	Value	Units
Storage Temperature	TSTG	-40 to +125	°C
Operating Temperature	TOPR	-40 to +85	°C
Lead Solder Temperature (1.6mm below seating plane)	TSOL	260 for 10 sec	°C
EMITTER Peak Transient Input Current (1s PW, 300 pps)	IF (PK)	1.0	A
Average Forward Input Current	IF	10	mA
Reverse Input Voltage	VR	5.0	V
Output Power Dissipation (No derating required up to 85°C)	PD	45	MW
DETECTOR Supply Voltage	VCC	0 to 20	V
Average Output Current	IO	25	mW
Three State Enable Voltage	VE	-0.5 to 20	V
Output Voltage	VO	-0.5 to 20	V
Output Power Dissipation (No derating required up to 85°C)	PD	150	mW

Product	Product status	Eco Status	Pricing*	Package type	Leads	Packing method	Package Drawing
FOD2200	Full Production	RoHS Compliant	$1.39	DIP-W	8	BULK	TBD
FOD2200S	Full Production	RoHS Compliant	$1.39	SMDIP-W	8	BULK	TBD
FOD2200SD	Full Production	RoHS Compliant	$1.44	SMDIP-W	8	TAPE REEL	TBD
FOD2200SDV	Full Production	RoHS Compliant	$1.44	SMDIP-W	8	TAPE REEL	TBD
FOD2200SV	Full Production	RoHS Compliant	$1.39	SMDIP-W	8	BULK	TBD
FOD2200TV	Full Production	RoHS Compliant	$1.39	DIP-W	8	BULK	TBD
FOD2200V	Full Production	RoHS Compliant	$1.39	DIP-W	8	BULK	TBD

* Fairchild 1,000 piece Budgetary Pricing

** A sample button will appear if the part is available through Fairchild's on-line samples program. If there is no sample button, please contact a Fairchild distributor to obtain samples

Description

The FOD2200 is an optically coupled logic gate that combine an AlGaAs LED and an integrated high gain photo detector. The FOD2200 has a three state
output stage and has a detector threshold with hysteresis. The three state output eliminates the need for a pullup resistor and allows for direct drive of
data busses. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter.

The Electrical and Switching Characteristics of the FOD2200 are guaranteed over the temperature range of 0°C to 85°C and a V_CC range of 4.5 volts to 20 volts. Low I_F and wide V_CC range allow compatibility with TTL, LSTTL, and CMOS logic and result in lower power consumption compared to other high
speed optocouplers. Logic signals are transmitted with a maximum propagation delay of 300 nsec. The FOD2200 is useful for isolating high speed logic
interfaces, buffering of input and output lines, and implementing isolated line receivers in high noise environments.




Parameters:

Technical/Catalog Information	FOD2200
Vendor	Fairchild Optoelectronics Group
Category	Isolators
Mounting Type	Through Hole
Package / Case	8-DIP
Isolation Voltage	5000Vrms
Configuration	1, One Direction
Input Type	DC
Output Type	Tri-State
Data Rate	2.5Mbs
Current - Output/Channel	25mA
Packaging	Tube
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	FOD2200 FOD2200