FPF2001

Supply Current :
Mounting Style : SMD/SMT
Packaging : Reel
Product : MOSFET Gate Drivers
Supply Voltage - Max : 5.5 V
Type : Low Side
Maximum Operating Temperature : + 85 C
Rise Time : 10 us
Fall Time : 0.1 us
Supply Voltage - Min : 1.8 V
Maximum Power Dissipation : 250 mW
Package / Case : SC70-5


Features:

1.8 to 5.5V Input Voltage Range
Controlled Turn-On
50mA and 100mA Current Limit Options
Under voltage Lockout
Thermal Shutdown
<1uA Shutdown Current
Auto Restart
Fast Current limit Response Time
• 3us to Moderate Over Currents
• 20ns to Hard Shorts
Fault Blanking

Application

PDAs
Cell Phones
GPS Devices
MP3 Players
Digital Cameras
Peripheral Ports
Hot Swap Supplies




Pinout






Specifications

Parameter		Min.	Max.	Unit
VIN		-0.3	6	V
DC Input Voltage		-0.7	6	V
Power Dissipation for Single Operation @ 85°C			250	mW
Operating Junction Temperature		-40	80	°C
Storage Temperature		-65	150	°C
Thermal Resistance, Junction to Ambient			400	°C/W
Electrostatic Discharge Protection	HBM	4000		V
	MM	400		V

Product	Product status	Eco Status	Pricing*	Package type	Leads	Packing method	Package Drawing	Package Marking Convention**
FPF2001	Full Production	RoHS Compliant	$0.34	SC70	5	TAPE REEL		Line 1: &E&Y (Binary Calendar Year Coding) Line 2: &O201&C Line 3: &.&O&V

* Fairchild 1,000 piece Budgetary Pricing

** A sample button will appear if the part is available through Fairchild's on-line samples program. If there is no sample button, please contact a Fairchild distributor to obtain samples

Package marking information for product FPF2001 is available. Click here for more information .

Description

The FPF2000 through FPF2007 is a family of load switches which provide full protection to systems and loads which may encounter large current conditions. FPF2000 through FPF2007 contain a 0.7 current-limited P-channel MOSFET which can operate over an input voltage range of 1.8-5.5V. Switch control is by a logic input (ON) capable of interfacing directly with low voltage control signals. Each part contains thermal shutdown protection which shuts off the switch to prevent damage to the part when a continuous over-current condition causes excessive heating.

When the switch current reaches the current limit, the part operates in a constant-current mode to prohibit excessive currents from causing damage. For the FPF2000-FPF2002 and FPF2004-FPF2006, if the constant current condition still persists after 10ms,these parts will shut off the switch and pull the fault signal pin (FLAGB) low. The FPF2000, FPF2001, FPF2004 and FPF2005,have an auto-restart feature which will turn the switch on again after 80ms if the ON pin is still active. The FPF2002 and FPF2006 do not have this auto-restart feature so the switch will remain off until the ON pin is cycled. For the FPF2003 and FPF2007, a current limit condition will immediately pull the fault signal pin low and the part will remain in the constant-current mode until the switch current falls below the current limit. For the FPF2000 through FPF2003, the minimum current limit is 50mA while that for the FPF2004 through FPF2007 is 100mA.

Parameters:

Technical/Catalog Information	FPF2001
Vendor	Fairchild Semiconductor (VA)
Category	Integrated Circuits (ICs)
Type	High Side Switch
Number of Outputs	1
Voltage - Input	1.8 ~ 5.5 V
Package / Case	SC-70-5, SC-88A, SOT-323-5, SOT-353
Packaging	Cut Tape (CT)
Current Limit	50mA
Internal Switch(s)	Yes
Operating Temperature	-40°C ~ 85°C
Rds (On)	1 Ohm
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	FPF2001 FPF2001 FPF2001CT ND FPF2001CTND FPF2001CT