Purchase G6853, In-stock G6853 From SeekIC.
Part Number: G6853
Description: The G6853 is an integrated Hall Effect switch sensor with output pull-high resistor driver designed fo...
- Table of contents:
G6853
-
Suppliers
DataSheet
General Description
G6853 General Description
The G6853 is an integrated Hall Effect switch sensor with output pull-high resistor driver designed for electronic commutation of brushless DC motor applications and contactless switches. The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the Hall voltage, and a Schmitt trigger to provide switching hysteresis for noise rejection, and output driver with pull-high resistor. An internal bandgap regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range.
If a magnetic flux density larger than threshold Bop, DO is turned on (low). The output state is held until a magnetic flux density reversal falls below Brp causing DO to be turned off (high).
The G6853 is rated for operation over temperature range from -40 oC to 150 oC and voltage range from 3.5V to 28V. The devices are available in low cost die forms or rugged 3 pin SIP packages.
G6853 Maximum Ratings
| Parameter |
Symbol |
Value |
Unit |
| Supply Voltage |
Vcc |
28V |
V |
| Reverse Vcc Polarity Voltage |
VRCC |
-28V |
V |
| Magnetic flux density |
B |
Unlimited |
|
| Output OFF Voltage |
Vce |
35 |
V |
| Output ON Current |
IC Continuous |
25 |
mA |
| Operating Temperature Range |
Ta |
-40~150 |
|
| Storage Temperature Range |
Ts |
-65~150 |
|
| Package Power Dissipation |
PD |
250 |
mW |
| Maximum Junction Temp. |
Tj |
175 |
G6853 Features
* Wide range of supply voltage:3.5V to 28V.
* Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range.
* High sensitivity with a small magnet.
* TTL and MOS ICs directly drivable by output.
* Build in protection diode for chip reverse power connecting.
* Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range.
* High sensitivity with a small magnet.
* TTL and MOS ICs directly drivable by output.
* Build in protection diode for chip reverse power connecting.
G6853 Typical Application
1) Current Limit
2) Limit Switch
3) Position Sensors
4) Rotation Sensors
5) Revolution Counting
6) Speed Measurement
2) Limit Switch
3) Position Sensors
4) Rotation Sensors
5) Revolution Counting
6) Speed Measurement
G6853 Connection Diagram
G680
PDF/DataSheet Download
- Datasheet: G680
- File Size: 103743 KB
- Manufacturer: ETC [ETC]
- Click here to Download
- ·G681
- ETC [ETC]
- Microprocessor Reset IC
- 103743 KB
- ·G6849
- HAMAMATSU [Hamamatsu Corporation]
- InGaAs PIN photodiode
- 120307 KB
- ·G6849-01
- HAMAMATSU [Hamamatsu Corporation]
- InGaAs PIN photodiode
- 120307 KB
- ·G6854-01
- HAMAMATSU [Hamamatsu Corporation]
- InGaAs PIN photodiode
- 179690 KB
G6853 Relative Products
G685
The G684/G685 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost and adjustments when used with +5V, +3.3V, +3.0V- powered circuits.Th...
G6849
G684
The G684/G685 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost and adjustments when used with +5V, +3.3V, +3.0V- powered circuits.Th...
G681
The G680/G681 are microprocessor (P) supervisory circuits used to monitor the power supplies in P and digital systems. High- and Low- voltage thresholds can be adjusted independently, allowing for wide hysteresis. Voltage detection thresholds are accurate to...
G680
The G680/G681 are microprocessor (P) supervisory circuits used to monitor the power supplies in P and digital systems. High- and Low- voltage thresholds can be adjusted independently, allowing for wide hysteresis. Voltage detection thresholds are accurate to...
G6742
Hotspot Suppliers Product
SC2200UFH-266
Price: 10-15 USD
NEW AND ORIGINAL BEST PRICE BEST CHOOSE
DS26C32ATM
Price: 0.47-0.94 USD
line receiver, SOP, 7V
MAX813LESA+
Price: 0.6-0.8 USD
microprocessor (μP) supervisory circuits, 8-pin DIP, SO and μMAX
SN74LS126AN
Price: 0.242-0.258 USD
bus buffer, 14DIP, 4.75 V ~ 5.25 V, 5.2mA, SN74LS126AN, Texas Instruments
SM6T36CA
Price: 0.01-0.02 USD
Transil diode, 600W, SMD , 100 A, 6.8V to 220 V, UL recognized, low clamping factor
PIC16F1828-I/SS
Price: 1.3-2 USD
IC PIC MCU 8BIT 14KB FLSH 20SSOP - PIC16F1828-I/SS
HAS400-S
Price: 13.5-15 USD
Current Transducer, ± 15 V, Hall effect
ADF4193BCPZ
Price: 2.54-2.95 USD
ADF4193BCPZ, -0.3 V to +3.6 V, 32LFCSP, Analog Devices, frequency synthesizer
MAX705CPA
Price: 0.476-0.512 USD
IC MPU SUPERVISORY CIRCUIT 8-DIP - MAX705CPA
AT45DB161B-RC
Price: 0.8-1.5 USD
serial interface Flash memory, SOP, -0.6V to +6.25V, Serial Peripheral Interface Compatible
ENC-03RA
Price: 2.5-3 USD
Piezoelectric Vibrating Gyroscopes ENC-03RA
SMBJ170A
Price: 0.0412-0.0474 USD
600W, surface mount, bidirectional transient voltage suppressor, 170V, 5%, DO-214AA/SMB
