Features: · Operate from 3.5V ~ 20V supply voltage.· On-chip Hall sensor with two different sensitivity and hysteresis settings.· High output sinking capability up to 300mA for driving large load.· Lower current change rate reduces the peak output voltages during switching.· Build-in protecting di...
H654: Features: · Operate from 3.5V ~ 20V supply voltage.· On-chip Hall sensor with two different sensitivity and hysteresis settings.· High output sinking capability up to 300mA for driving large load.· ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter | Symbol | Limits | Unit |
Supply Voltage | VCC | 20 | V |
Reverse VCC Polarity Voltage | VRCC | -35 | V |
Output OFF Voltage | VCE | 50 | mA |
Magnetic flux density | B | Unlimited | |
Output ON Current Continuous Hold Peak (Start Up) |
IC | 0.3 0.4 0.4 |
A |
Power Dissipation | Pd | 500 | mW |
Operating Temperature | TOPR | 0 ~ +70 | |
Junction Temperature | Tj | +125 | |
Storage Temperature | Tstg | -40~+150 |
The UTC H654 is integrated Hall sensors with complementary output drivers designed for electronic commutation of brushless DC Fan. It composed of an on-chip Hall voltage generator, a differential amplifier, Schmitt trigger, an open-collector output on a single chip. Furthermore, an internal bandgap regulator allows temperature compensated operations and a wide operating supply range. An on-chip protection diode is implemented to prevent reverse power fault.
When the magnetic flux density of H654 larger than threshold BOP, DO will be turned on(low) and DOB be turned off(high). The output state is held until the magnetic flux density is lower than BRP, and then DO is reversal to turned off and DOB turned on.