Features: distance between Hall plates: 2.25 mm operates from 4.5 V to 24 V supply voltage switching offset compensation at 62 kHz overvoltage protection reverse-voltage protection of VDD-pin short-circuit protected open-drain output by thermal shutdown operates with magnetic fields from DC to 10...
HAL320: Features: distance between Hall plates: 2.25 mm operates from 4.5 V to 24 V supply voltage switching offset compensation at 62 kHz overvoltage protection reverse-voltage protection of VDD-pin short...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
distance between Hall plates: 2.25 mm
operates from 4.5 V to 24 V supply voltage
switching offset compensation at 62 kHz
overvoltage protection
reverse-voltage protection of VDD-pin
short-circuit protected open-drain output by thermal shutdown
operates with magnetic fields from DC to 10 kHz
output turns low with magnetic south pole on branded side of package and with a higher magnetic flux density in sensitive area S1 as in S2
on-chip temperature compensation circuitry minimizes shifts of the magnetic parameters over temperature and supply voltage range
EMC corresponding to DIN 40839
Symbol |
Parameter |
Pin No. |
Min. |
Max. |
Unit |
VDD |
Supply Voltage |
1 |
-15 |
281) |
V |
-VP |
Test Voltage for Supply |
1 |
-242) |
- |
V |
-IDD |
Reverse Supply Current |
1 |
- |
501) |
mA |
IDDZ |
Supply Current through Protection Device |
1 |
-2003) |
2003) |
mA |
VO |
Output Voltage |
3 |
-0.3 |
281) |
V |
IO |
Continuous Output On Current |
3 |
- |
30 |
mA |
IOmax |
Peak Output On Current |
3 |
- |
2503) |
mA |
IOZ |
Output Current through Protection Device |
3 |
-2003) |
2503) |
mA |
TS |
Storage Temperature Range |
-65 |
150 |
°C | |
TJ |
Junction Temperature Range |
-40 -40 |
150 1704) |
°C |