HCNR200

Input Type : AC/DC
Maximum Forward Diode Voltage : 1.95 V
Maximum Reverse Diode Voltage : 2.5 V
Maximum Input Diode Current : 25 mA
Maximum Power Dissipation : 60 mW
Maximum Operating Temperature : + 100 C
Minimum Operating Temperature : - 55 C
Packaging : Tube
Package / Case : DIP-8


Features:

• Low Nonlinearity: 0.01%
• K₃ (IPD2/IPD1) Transfer Gain HCNR200: ± 15% HCNR201: ± 5%
• Low Gain Temperature Coefficient: -65 ppm/°C
• Wide Bandwidth DC to >1 MHz
• Worldwide Safety Approval
- UL 1577 Recognized (5 kV rms/1 min Rating)
- CSA Approved
- BSI Certified
- VDE 0884 Approved V_IORM = 1414 V_peak (Option #050)
• Surface Mount Option Available (Option #300)
• 8-Pin DIP Package - 0.400" Spacing
• Allows Flexible Circuit Design
• Special Selection for HCNR201: Tighter K₁, K₃ and Lower Nonlinearity Available




Application

• Low Cost Analog Isolation
• Telecom: Modem, PBX
• Industrial Process Control: Transducer Isolator Isolator for Thermocouples 4 mA to 20 mA Loop Isolation
• SMPS Feedback Loop, SMPS Feedforward
• Monitor Motor Supply Voltage
• Medical




Specifications

Storage Temperature ............................................. -55°C to +125°C
Operating Temperature (T_A) ....................................-55°C to +100°C
Junction Temperature (T_J) .........................................................125°C
Reflow Temperature Profile ... See Package Outline Drawings Section
Lead Solder Temperature .............................................260°C for 10s
(up to seating plane)
Average Input Current - I_F .........................................................25 mA
Peak Input Current - I_F ..............................................................40 mA
(50 ns maximum pulse width)
Reverse Input Voltage - V_R .........................................................2.5 V
(I_R = 100 A, Pin 1-2)
Input Power Dissipation .....................................60 mW @ T_A = 85°C
(Derate at 2.2 mW/°C for operating temperatures above 85°C)
Reverse Output Photodiode Voltage ............................................30 V
(Pin 6-5)
Reverse Input Photodiode Voltage.............................................. 30 V
(Pin 3-4)




Description

The HCNR200 high-linearity analog optocoupler consists of a high-performance AlGaAs LED that illuminates two closely matched photodiodes. The input photodiode can be used to monitor, and therefore stabilize, the light output of the LED. As a result, the nonlinearity and drift characteristics of the LED can be virtually eliminated. The output photodiode produces a photocurrent that is linearly related to the light output of the LED. The close matching of the photodiode and advanced design of the package ensure the high linearity and stable gain characteristics of the optocoupler.

The HCNR200 can be used to isolate analog signals in a wide variety of applications that require good stability, linearity, bandwidth and low cost. The HCNR200 is very flexible and, by appropriate design of the application circuit, is capable of operating in many different modes, including: unipolar/bipolar, AC/DC and inverting/non-inverting. The HCNR200 is an excellent solution for many analog isolation problems.

Parameters:

Technical/Catalog Information	HCNR200
Vendor	Avago Technologies US Inc.
Category	Isolators
Isolation Voltage	5000Vrms
Input Type	DC
Output Type	Linear Photovoltaic
Current - Output/Channel	-
Voltage - Output	-
Vce Saturation (Max)	-
Current Transfer Ratio (Min)	0.25% @ 10mA
Mounting Type	Through Hole
Package / Case	8-DIP Wide
Packaging	Tube
Number of Circuits	1 - Single
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	HCNR200 HCNR200 516 1135 5 ND 51611355ND 516-1135-5