HCNW2611

Current Transfer Ratio :
Maximum Input Diode Current :
Minimum Operating Temperature : - 40 C
Packaging : Tube
Maximum Reverse Diode Voltage : 3 V
Maximum Operating Temperature : + 85 C
Maximum Baud Rate : 10 MBps
Maximum Forward Diode Voltage : 1.85 V
Maximum Power Dissipation : 85 mW
Package / Case : PDIP-8


Description

The HCNW2611 optocoupler is an optically coupled digital gate that combines a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed. The output of the detector IC is an open collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 10,000 V/ms.

This unique design of HCNW2611 provides maximum ac and dc circuit isolation while achieving TTL compatibility. The optocoupler ac and dc operational parameters are guaranteed from -40 degrees C to 85 degrees C allowing troublefree system performance.

HCNW2611 is suitable for high speed logic interfacing, input/output buffering, as line receivers in environments that conventional line receivers cannot tolerate and is recommended for use in extremely high ground or induced noise environments.

Parameters:

Technical/Catalog Information	HCNW2611
Vendor	Avago Technologies US Inc.
Category	Isolators
Mounting Type	Through Hole
Package / Case	8-DIP Wide
Isolation Voltage	2500Vrms
Configuration	1, One Direction
Input Type	DC
Output Type	Open Collector
Data Rate	10Mbs
Current - Output/Channel	50mA
Packaging	Tube
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	HCNW2611 HCNW2611 516 1082 5 ND 51610825ND 516-1082-5