HCPL-0314

Current Transfer Ratio :
Maximum Baud Rate :
Maximum Input Diode Current :
Maximum Forward Diode Voltage : 1.8 V
Maximum Reverse Diode Voltage : 5 V
Maximum Operating Temperature : + 100 C
Minimum Operating Temperature : - 40 C
Packaging : Tube
Package / Case : SOIC-8
Maximum Power Dissipation : 250 mW


Features:

• 0.4 A minimum peak output current
• High speed response: 0.7 ms maximum propagation delay over temperature range
• Ultra high CMR: minimum 10 kV/s at V_CM = 1 kV
• Bootstrappable supply current: maximum 3 mA
• Wide operating temperature range: 40°C to 100°C
• Wide V_CC operating range: 10 V to 30 V over temp. range
• Available in DIP8 and SO8 package
• Safety approvals: UL approval pending, 2500 Vrms for 1 minute. CSA approval pending. VDE approval pending V_IORM = 630 V_peak (HCPL-3140)




Application

· Isolated IGBT/Power MOSFET gate drive
· AC and brushless DC motor drives
· Inverters for home appliances
· Industrial inverters
· Switch Mode Power Supplies (SMPS)




Specifications

Parameter	Symbol	Min.	Max.	Units	Note
Storage Temperature	TS	-50	125
Operating Temperature	TA	-40	100
Average Input Current	I F(AVG)		25	mA	1
Peak Transient Input Current (<1 ms pulse width, 300pps)	IF(TRAN)		1.0	A
Reverse Input Voltage	VR		5	V
"High" Peak Output Current	IOH(PEAK)		0.6	A	2
"Low" Peak Output Current	IOL(PEAK)		0.6	A	2
Supply Voltage	VCC-VEE	-0.5	35	V
Output Voltage	VO(PEAK)	-0.5	VCC	V
Output Power Dissipation	PO		250	mW	3
Input Power Dissipation	PI		105	mW	4
Lead Solder Temperature	260°C for 10 sec., 1.6 mm below seating plane
Solder Reflow Temperature Profile	See Package Outline Drawings section

Description

The HCPL-3140/HCPL-0314 family of devices consists of a GaAsP LED optically coupled to an integrated circuit with a power output stage. These HCPL-3140/HCPL-0314 optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by this optocoupler makes it ideally suited for directly driving small or medium power IGBTs. For IGBTs with higher ratings, the HCPL-3150 (0.5 A) or HCPL-3120 (2.0 A) optocouplers can be used.

Parameters:

Technical/Catalog Information	HCPL-0314
Vendor	Avago Technologies US Inc.
Category	Isolators
Mounting Type	Surface Mount
Package / Case	8-SOIC (3.9mm Width)
Isolation Voltage	3750Vrms
Configuration	1, One Direction
Input Type	DC
Output Type	Push-Pull, Totem-Pole
Data Rate	-
Current - Output/Channel	600mA
Packaging	Tube
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	HCPL 0314 HCPL0314 516 1126 5 ND 51611265ND 516-1126-5