HCPL-2212

Current Transfer Ratio :
Maximum Input Diode Current :
Maximum Reverse Diode Voltage : 5 V
Minimum Operating Temperature : - 40 C
Packaging : Tube
Maximum Forward Diode Voltage : 1.7 V
Maximum Operating Temperature : + 85 C
Package / Case : PDIP-8
Maximum Baud Rate : 5 MBps
Maximum Power Dissipation : 210 mW


Description

The HCPL-2212 is a optically-coupled logic gate. It contains an GaAsP LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logic-compatible waveforms, illuminating the need for additional waveshaping.

A superior internal shield on the HCPL-2212 guarantees common mode transient immunity of 10 kV/ms at a common mode voltage of 1000 volts.

The electrical and switching characteristics of the HCPL-2212 is guaranteed from -40 degrees C to 85 degrees C and a VCC from 4.5 volts to 20 volts. Low IF and wide VCC range allows compatibility with TTL, LSTTL, and CMOS logic and result in lower power consumption compared to other high speed couplers. Logic signals are transmitted with a typical propagation delay of 150 ns.

Parameters:

Technical/Catalog Information	HCPL-2212
Vendor	Avago Technologies US Inc.
Category	Isolators
Mounting Type	Through Hole
Package / Case	8-DIP
Isolation Voltage	3750Vrms
Configuration	1, One Direction
Input Type	DC
Output Type	Push-Pull, Totem-Pole
Data Rate	5Mbs
Current - Output/Channel	25mA
Packaging	Tube
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	HCPL 2212 HCPL2212 516 1060 5 ND 51610605ND 516-1060-5