Current Transfer Ratio
:
Maximum Input Diode Current
:
Maximum Reverse Diode Voltage
: 5 V
Minimum Operating Temperature
: - 40 C
Packaging
: Tube
Maximum Forward Diode Voltage
: 1.7 V
Maximum Operating Temperature
: + 85 C
Package / Case
: PDIP-8
Maximum Baud Rate
: 5 MBps
Maximum Power Dissipation
: 294 mW
DescriptionThe HCPL-2232 is a optically-coupled logic gate. It contains an GaAsP LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logic-compatible waveforms, illuminating the need for additional waveshaping.
A superior internal shield on the HCPL-2232 guarantees common mode transient immunity of 10 kV/ms at a common mode voltage of 1000 volts.
The electrical and switching characteristics of the HCPL-2232 is guaranteed from -40 degrees C to 85 degrees C and a VCC from 4.5 volts to 20 volts. Low IF and wide VCC range allows compatibility with TTL, LSTTL, and CMOS logic and result in lower power consumption compared to other high speed couplers. Logic signals are transmitted with a typical propagation delay of 150 ns.
Parameters: | Technical/Catalog Information | HCPL-2232 |
| Vendor | Avago Technologies US Inc. |
| Category | Isolators |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP |
| Isolation Voltage | 3750Vrms |
| Configuration | 2, One Direction |
| Input Type | DC |
| Output Type | Push-Pull, Totem-Pole |
| Data Rate | 5Mbs |
| Current - Output/Channel | 25mA |
| Packaging | Tube |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | HCPL 2232
HCPL2232
516 1063 5 ND
51610635ND
516-1063-5
|
HCPL-2232 Data Sheet
