Current Transfer Ratio
:
Maximum Input Diode Current
:
Maximum Reverse Diode Voltage
: 5 V
Minimum Operating Temperature
: - 40 C
Packaging
: Tube
Maximum Operating Temperature
: + 85 C
Maximum Baud Rate
: 10 MBps
Maximum Power Dissipation
: 85 mW
Maximum Forward Diode Voltage
: 1.75 V
Package / Case
: PDIP-8
Specifications
| HCPL2601 |
Full Production |
RoHS Compliant |
$0.75 |
DIP-B |
8 |
BULK |
TBD |
| HCPL2601S |
Full Production |
RoHS Compliant |
$0.75 |
SMDIP-B |
8 |
BULK |
TBD |
| HCPL2601SD |
Full Production |
RoHS Compliant |
$0.76 |
SMDIP-B |
8 |
TAPE REEL |
TBD |
| HCPL2601SDV |
Full Production |
RoHS Compliant |
$0.76 |
SMDIP-B |
8 |
TAPE REEL |
TBD |
| HCPL2601SV |
Full Production |
RoHS Compliant |
$0.75 |
SMDIP-B |
8 |
BULK |
TBD |
| HCPL2601V |
Full Production |
RoHS Compliant |
$0.75 |
DIP-B |
8 |
BULK |
TBD |
| HCPL2601W |
Not recommended for new designs |
RoHS Compliant |
N/A |
DIP-B |
8 |
BULK |
TBD |
| HCPL2601WV |
Full Production |
RoHS Compliant |
$0.75 |
DIP-B |
8 |
BULK |
TBD |
* Fairchild 1,000 piece Budgetary Pricing
|
| ** A sample button will appear if the part is available through Fairchild's on-line samples program. If there is no sample button, please contact a Fairchild distributor to obtain samples |
DescriptionThe HCPL-2601 is a optically coupled gate that combines a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed. The output of the detector IC is an open collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 5,000 V/ms.
This unique design of HCPL-2601 provides maximum ac and dc circuit isolation while achieving TTL compatibility. The optocoupler ac and dc operational parameters are guaranteed from -40 degrees C to 85 degrees C allowing troublefree system performance.
HCPL-2601 is suitable for high speed logic interfacing, input/output buffering, as line receivers in environments that conventional line receivers cannot tolerate and is recommended for use in extremely high ground or induced noise environments.
Parameters: | Technical/Catalog Information | HCPL-2601 |
| Vendor | Avago Technologies US Inc. |
| Category | Isolators |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP |
| Isolation Voltage | 3750Vrms |
| Configuration | 1, One Direction |
| Input Type | DC |
| Output Type | Open Collector |
| Data Rate | - |
| Current - Output/Channel | 50mA |
| Packaging | Tube |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | HCPL 2601
HCPL2601
516 1076 5 ND
51610765ND
516-1076-5
|
HCPL-2601 Data Sheet
