HCPL-2630

Current Transfer Ratio :
Maximum Input Diode Current :
Maximum Reverse Diode Voltage : 5 V
Minimum Operating Temperature : - 40 C
Packaging : Tube
Maximum Operating Temperature : + 85 C
Maximum Baud Rate : 10 MBps
Maximum Forward Diode Voltage : 1.75 V
Maximum Power Dissipation : 60 mW
Package / Case : PDIP-8


Features:

• Available in 8 Pin DIP and SOIC-8
• Internal Shield for High Common Mode Rejection (CMR)
HCPL-2631/0631: 10,000 V/ms @ VCM = 50 V
HCPL-4661/0661: 15,000 V/ms @ VCM = 1000 V
• High Density Packaging
• Low Input Current Capability: 5 mA
• High Speed: 10 MBd
• LSTTL and TTL Compatible
• Guaranteed AC and DC Performance Over Temperature: -40°C to 85°C
• Recognized Under the Component Program of UL1577 (File No. E55361) for Dielectric Withstand Proof Test Voltages of 2500 Vrms, 1 Minute
• 5000 Vrms, 1 Minute (Option 020) (HCPL-2630/ 2631/4661)
• CSA Approved Under Component Acceptance Notice No. 5 (File No. CA 88324) (HCPL-2630/2631/ 4661)
• Hermetic Equivalent Device Available (HCPL- 5630/31)
• Surface Mount Gull Wing Option Available for 8 Pin DIP (Option 300)




Application

• Isolation of High Speed Logic Systems
• Microprocessor System Interfaces
• Isolated Line Receiver
• Computer-Peripheral Interfaces
• Ground Loop Elimination
• Digital Isolation for A/D, D/A Conversion
• Power Transistor Isolation in Motor Drives




Specifications

Product	Product status	Eco Status	Pricing*	Package type	Leads	Packing method	Package Drawing
HCPL2630	Full Production	RoHS Compliant	$1.39	DIP-B	8	BULK	TBD
HCPL2630S	Full Production	RoHS Compliant	$1.39	SMDIP-B	8	BULK	TBD
HCPL2630SD	Full Production	RoHS Compliant	$1.40	SMDIP-B	8	TAPE REEL	TBD
HCPL2630SDV	Full Production	RoHS Compliant	$1.40	SMDIP-B	8	TAPE REEL	TBD
HCPL2630SV	Full Production	RoHS Compliant	$1.39	SMDIP-B	8	BULK	TBD
HCPL2630V	Full Production	RoHS Compliant	$1.39	DIP-B	8	BULK	TBD
HCPL2630W	Not recommended for new designs	RoHS Compliant	N/A	DIP-B	8	BULK	TBD
HCPL2630WV	Full Production	RoHS Compliant	$1.39	DIP-B	8	BULK	TBD

* Fairchild 1,000 piece Budgetary Pricing

** A sample button will appear if the part is available through Fairchild's on-line samples program. If there is no sample button, please contact a Fairchild distributor to obtain samples

Storage Temperature ............................................ -55°C to +125°C
Operating Temperature ........................................... -40°C to +85°C
Lead Solder Temperature (8 Pin DIP) .......................... 260°C for 10 s
(1.6 mm below seating plane)
Average Forward Input Current
(each channel, See note 2) ..................................................... 15 mA
Reverse Input Voltage (each channel) .......................................... 5 V
Supply Voltage VCC (1 Minute Maximum) ................................ 7 V
Output Collector Current IO (each channel) ......................... 50 mA
Output Collector Voltage VO (each channel)** ......................... 7 V
Output Collector Power Dissipation (each channel) ........... 60 mW[17]
Infrared and Vapor Phase Reflow
Temperature (SOIC-8 & Option #300) ................. See Thermal Profile




Description

The 6N137, HCPL2601, HCPL2611 single-channel and HCPL2630, HCPL2631 dual-channel optocouplers consist of a 850 nm AlGaAS LED, optically coupled to a very high speed integrated photo-detector logic gate with a strobable output. This output features an open collector, thereby permitting wired OR outputs. The coupled parameters are guaranteed over the temperature range of -40°C to +85°C. A maximum input signal of 5mA will provide a minimum output sink current of 13mA (fan out of 8).

An internal noise shield provides superior common mode rejection of typically 10kV/µs. The 6N137, HCPL2601, HCPL2611  have a minimum CMR of 5kV/µs. The HCPL2611 has a minimum CMR of 10kV/µs. The HCPL-2630 is a optically coupled gate that combines a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed. The output of the detector IC is an open collector Schottky-clamped transistor.

This unique design of 6N137, HCPL2601, HCPL2611  provides maximum ac and dc circuit isolation while achieving TTL compatibility. The optocoupler ac and dc operational parameters are guaranteed from -40^oC to 85^oC allowing troublefree system performance. HCPL-2630 is suitable for high speed logic interfacing, input/output buffering, as line receivers in environments that conventional line receivers cannot tolerate and is recommended for use in extremely high ground or induced noise environments.

These dual channel 6N137, HCPL2601, HCPL2611  are optically coupled logic gates that combine GaAsP light emitting diodes and integrated high gain photodetectors. The photons are collected in the detector by a photodiode and the current is amplified by a high gain linear amplifier that drives a Schottky clamped open collector output transistor. Each circuit is temperature, current and voltage compensated. Theinternal shield provides a guaranteed common mode transient immunity specification of 5000 V/ms for the HCPL- 2631/0631, and 10,000 V/ms for the HCPL-4661/0661.

These 6N137, HCPL2601, HCPL2611  dual channel optocouplers are available in an 8 Pin DIP and in an industry standard SOIC-8 package. The following is a cross reference table listing the 8 Pin DIP part number and the electrically equivalent SOIC-8 part number.

Parameters:

Technical/Catalog Information	HCPL-2630
Vendor	Avago Technologies US Inc.
Category	Isolators
Mounting Type	Through Hole
Package / Case	8-DIP
Isolation Voltage	5000Vrms
Configuration	2, One Direction
Input Type	DC
Output Type	Open Collector
Data Rate	10Mbs
Current - Output/Channel	50mA
Packaging	Tube
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	HCPL 2630 HCPL2630 516 1086 5 ND 51610865ND 516-1086-5