Features: • 15 kV/µs Minimum Common Mode Transient Immunity at VCM = 1500 V (4503/0453)• High Speed: 1 Mb/s• TTL Compatible• Available in 8-Pin DIP, SO-8,Widebody Packages• Open Collector Output• Guaranteed Performance from Temperature: 0°C to 70°C• ...
HCPL-4502-300_1081658: Features: • 15 kV/µs Minimum Common Mode Transient Immunity at VCM = 1500 V (4503/0453)• High Speed: 1 Mb/s• TTL Compatible• Available in 8-Pin DIP, SO-8,Widebody Packa...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
• 15 kV/µs Minimum Common Mode Transient Immunity at VCM = 1500 V (4503/0453)
• High Speed: 1 Mb/s
• TTL Compatible
• Available in 8-Pin DIP, SO-8,Widebody Packages
• Open Collector Output
• Guaranteed Performance from Temperature: 0°C to 70°C
• Safety Approval UL Recognized 3750 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577 CSA Approved IEC/EN/DIN EN 60747-5-2 Approved
VIORM = 630 V peak for HCPL-4503#060
VIORM = 1414 V peak for HCNW devices
• Dual Channel Version Available (253X/4534/053X/0534)
• MIL-PRF-38534 Hermetic Version Available (55XX/65XX/4N55)

| Parameter | Symbol | Device | Min. | Max. | Units | Note |
| Storage Temperature* | TS | -55 | 125 | |||
| Operating Temperature* | TA | 8-Pin DIP SO-8 |
-55 | 100 | ||
| Widebody | -55 | 85 | ||||
| Average Forward Input Current* | IF(AVG) | 25 | mA | 1 | ||
| Peak Forward Input Current* (50% duty cycle, 1 ms pulse width) (50% duty cycle, 1 ms pulse width) |
IF(PEAK) | 8-Pin DIP SO-8 |
50 | mA | ||
| Widebody | 40 | |||||
| Peak Transient Input Current* ( 1 µs pulse width, 300 pps) |
IF(TRANS) | 8-Pin DIP SO-8 |
1 | A | ||
| Widebody |
0.1 | |||||
| Reverse LED Input Voltage* (Pin 3-2) | VR | 8-Pin DIP SO-8 |
5 | V | ||
| Widebody | 3 | |||||
| Input Power Dissipation* | PIN | 8-Pin DIP SO-8 |
45 | mW | 3 | |
| Widebody | 40 | |||||
| Average Output Current* (Pin 6) | IO(AVG) | 8 | mA | |||
| Peak Output Current* | IO(PEAK) | 16 | mA | |||
| Emitter-Base Reverse Voltage* (Pin 5-7, except 4502/3, 0452/3) |
VEBR | 5 | V | |||
| Supply Voltage (Pins 8-5) | VCC | -0.5 | 30 | V | ||
| Output Voltage (Pins 6-5) | VO | -0.5 | 20 | V | ||
| Supply Voltage* (Pin 8-5) | VCC | -0.5 | 15 | V | ||
| Output Voltage* (Pin 6-5) | VO | -0.5 | 15 | V | ||
| Base Current* (Pin 7, except 4502/3, 0452/3) | IB | 5 | mA | |||
| Output Power Dissipation* | PO | 100 | mW | 4 | ||
| Lead Solder Temperature* (Through-Hole Parts Only) 1.6 mm below seating plane, 10 seconds up to seating plane, 10 seconds |
TLS | 8-Pin DIP | 260 | |||
| Widebody | 260 | |||||
| Reflow Temperature Profile |
TRP | SO-8 and Option 30 |
See Package Outline Drawings section |
|||
These HCPL-4502-300_1081658 diode-transistor optocoup-lers use an insulating layer between a LED and an integrated photodetector to provide elec-trical insulation between input and output. Separate connections for the HCPL-4502-300_1081658 photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conven-tional phototransistor coupler by reducing the base-collector capacitance.