HCPL-5120

Isolation Voltage :
Maximum Continuous Output Current :
Packaging :
Maximum Operating Temperature : + 125 C
Maximum Propagation Delay Time : 500 ns
Maximum Forward Diode Voltage : 1.8 V
Maximum Reverse Diode Voltage : 5 V
Output Type : Open Collector
Maximum Power Dissipation : 295 mW
Package / Case : DIP-8
Minimum Operating Temperature : - 55 C
Maximum Forward Diode Current : 18 mA


Features:

• Performance Guaranteed over Full Military Temperature Range:-55 to +125
• Manufactured and Tested on a MILPRF-38534 Certified Line
• Hermetically Sealed Packages
• Dual Marked with Device Part Number and DSCC Drawing Number
• QML-38534
• HCPL-3120 Function Compatibility
• 2.0 A Minimum Peak Output Current
• 0.5V Maximum Low Level Output Voltage (V_OL) Eliminates Need for Negative Gate Drive
• 10 kV/s Minimum Common Mode Rejection (CMR) at V_CM = 1000V
• I_CC = 5 mA Maximum Supply Current
• Under Voltage Lock-Out Protection (UVLO) with Hysteresis
• Wide Operating V_CC Range: 15 to 30 Volts
• 500 ns Maximum Propagation Delay
• ± 0.35s Maximun Delay Between Devices

Application

• Industrial and Military Environments
• High Reliability Systems
• Harsh Industrial Environments
• Transportation, Medical, and Life Critical Systems
• Uninterruptible Power Supplies (UPS)
• Isolated IGBT/MOSFET Gate Drive
• AC and Brushless DC Motor Drives
• Industrial Inverters
• Switch Mode Power Supplies (SMPS)




Pinout






Specifications

Parameter	Symbol	Min.	Max.	Units	Note
Storage Temperature	TS	-65	+150
Operating Temperature	TA	-55	+125
Case Temperature	TC		+145
Junction Temperature	TJ		+150
Lead Solder Temperature			260 for 10s
Average Input Current	IFAVG		25	mA	1
Peak Transient Input Current (<1 s pulse width, 300 pps)	IFPK		1.0	A
Reverse Input Voltage	VR		5	V
"High" Peak Output Current	IOH(PEAK)		2.5	A	2
"Low" Peak Output Current	IOL(PEAK)		2.5	A	2
Supply Voltage	(VCC-VEE)	0	35	V
Output Voltage	VO(PEAK)	0	VCC	V
Emitter Power Dissipation	PE		45	mW	1
Output Power Dissipation	PO		250	mW	3
Total Power Dissipation	PT		295	mW	4

Notes:
1. No derating required for typical case-to-ambient thermal resistance (_CA=140/W). Refer to Figure 35.
2. Maximum pulse width = 10s, maximum duty cycle = 0.2%. This value is intended to allow for component tolerances for designs with I_O peak minimum = 2.0A. See Applications section for additional details on limiting I_OH peak.
3. Derate linearly above 102 free air temperature at a rate of 6mW/ for typical case-to-ambient thermal resistance (_CA=140/W). Refer to Figure 36.
4. Derate linearly above 102 free air temperature at a rate of 6mW/ for typical case-to-ambient thermal resistance (_CA=140/W). Refer to Figure 35 and 36.

Description

The HCPL- 5120 contains a GaAsP LED optically coupled to an integrated circuit with a power output stage. The device is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current of HCPL- 5120  supplied by this optocoupler makes HCPL- 5120  ideally suited for directly driving IGBTs with ratings up to 1200 V/100 A. For IGBTs with higher ratings, the HCPL- 5120 can be used to drive a discrete power stage, which drives the IGBT gate.

The HCPL- 5120  is capable of operation and storage over the full military temperature range and can be purchased as either commercial products, with full MIL- PRF- 38534 Class H testing,or from Defense Supply Center Columbus (DSCC) Standard Microcircuit Drawing (SMD) 5962- 04204. All devices are manufactured and tested on a MIL-PRF- 38534 certified line and are included in the DSCC Qualified Manufacturers List,QML- 38534 for Hybrid Microcircuits.

Parameters:

Technical/Catalog Information	HCPL-5120
Vendor	Avago Technologies US Inc.
Category	Isolators
Mounting Type	Surface Mount
Package / Case	8-SMD
Isolation Voltage	1000Vrms
Configuration	1, One Direction
Input Type	DC
Output Type	Push-Pull, Totem-Pole
Data Rate	-
Current - Output/Channel	2A
Packaging	Tube
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	HCPL 5120 HCPL5120