HCPL-M611

Current Transfer Ratio :
Maximum Input Diode Current :
Maximum Reverse Diode Voltage : 5 V
Minimum Operating Temperature : - 40 C
Packaging : Tube
Package / Case : SOIC-5
Maximum Operating Temperature : + 85 C
Maximum Baud Rate : 10 MBps
Maximum Power Dissipation : 85 mW
Maximum Forward Diode Voltage : 1.75 V


Features:

.Surface Mountable
.Very Small, Low Profile JEDEC Registered Package Outline
.Compatible with Infrared Vapor Phase Reflow and Wave Soldering Processes
.Internal Shield for High
Common Mode Rejection
(CMR)
HCPL-M601: 10,000 V/s at
VCM = 50 V
HCPL-M611: 15,000 V/s at
VCM = 1000 V
.High Speed: 10 Mbd
.LSTTL/TTL Compatible
.Low Input Current
Capability: 5 mA
.Guaranteed ac and dc
Performance over
Temperature: -40° C to 85° C
.Recognized under the
Component Program of U.L
(File No. E55361) for
Dielectric Withstand Proof
Test Voltage of 2500 Vac, 1Minute




Application

.Isolated Line Receiver
.Simplex/Multiplex Data Transmission
.Computer-Peripheral Interface
.Microprocessor System Interface
.Digital Isolation for A/D, D/A Conversion
.Switching Power Supply
.Instrument Input/Output Isolation
.Ground Loop Elimination
.Pulse Transformer Replacement




Specifications

(No Derating Required up to 85°C)
Storage Temperature....................................................-55°C to +125°C
Operating Temperature ..................................................-40°C to +85°C
Forward Input Current - I_F (see Note 2).......................................... 20 mA
Reverse Input Voltage - V_R................................................................. .5 V
Supply Voltage - VCC (1 Minute Maximum)........................................... 7 V
Output Collector Current - I_O........................................................ ..50 mA
Output Collector Power Dissipation .............................................. 85 mW
Output Collector Voltage - V_O ............................................................ 7 V
(Selection for higher output voltages up to 20 V is available)
Infrared and Vapor Phase Reflow Temperature....................... see below

Description

This small outline high CMR, high speed, logic gate optocoupler is a single channel device in a five lead miniature footprint. The HCPL-M611 optically coupled gates combine a GaAsP light emitting diode and an integrated high gain photon detector. The output of the detector I.C. is an Open-collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 10000 V/ms.

This unique design of HCPL-M611 provides maximum ac and dc circuit isolation while achieving TTL compatibility. The optocoupler ac and dc operational parameters are guaranteed from -40^oC to 85^oC allowing troublefree system performance.

The HCPL-M611 is suitable for high speed logic interfacing, input/output buffering, as line receivers in environments that conventional line receivers cannot tolerate, and are recommended for use in extremely high ground or induced noise environments.

Parameters:

Technical/Catalog Information	HCPL-M611
Vendor	Avago Technologies US Inc.
Category	Isolators
Mounting Type	Surface Mount
Package / Case	5-SOIC
Isolation Voltage	3750Vrms
Configuration	1, One Direction
Input Type	DC
Output Type	Open Collector
Data Rate	-
Current - Output/Channel	50mA
Packaging	Tube
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	HCPL M611 HCPLM611 516 1081 5 ND 51610815ND 516-1081-5