HLMA-QH00

Forward Current : 20 mA
Illumination Color : Orange
Lens Color/Style : Untinted Non-Diffused
Viewing Angle : 15 deg
Packaging : Bulk
Wavelength/Color Temperature : 615 nm
Forward Voltage : 1.9 V
LED Size : 2.34 mm x 2.21 mm x 2.92 mm
Luminous Intensity : 500 mcd


Features:

• Subminiature Flat Top Package Ideal for Backlighting and Light Piping Applications
• Subminiature Dome Package Nondiffused Dome for High Brightness
• Wide Range of Drive Currents
• Colors: 590 nm Amber, 615 nm Reddish-Orange
• Ideal for Space Limited Applications
• Axial Leads
• Available with Lead Configurations for Surface Mount and Through Hole PC Board Mounting




Specifications

HLMA-QL00/QH00/PL00/PH00
Peak Forward Current[2] ........................................................... 200 mA
Average Forward Current (I_PEAK = 200 mA)[1,2] ......................... 45 mA
DC Forward Current[3,5,6] .......................................................... 50 mA
Power Dissipation .................................................................... 105 mW
HLMT-QL00/QH00/PL00/PH00
Peak Forward Current[2] ........................................................... 100 mA
Average Forward Current (I_PEAK = 100 mA)[1,2] ........................ 37 mA
DC Forward Current[3,5,6] ...........................................................50 mA
Power Dissipation ..................................................................... 120 mW
All Devices
Reverse Voltage (I_R = 100 mA) ........................................................ 5 V
Transient Forward Current (10 ms Pulse)[5] .............................. 500 mA
Operating Temperature Range ......................................... -40 to +100
Storage Temperature Range .............................................-55 to +100
LED Junction Temperature ............................................................. 110
Lead Soldering Temperature
[1.6 mm (0.063 in.) from body .............................. 260°C for 5 seconds
SMT Reflow Soldering Temperatures
Convective Reflow ................ 235 Peak, above 183°C for 90 seconds
Vapor Phase Reflow .............................................. 215°C for 3 minutes




Description

Dome Packages
The HLMA-QH00 dome lamps use an untinted, nondiffused lens to provide a high luminous intensity within a narrow radiation pattern.

Lead Configurations
All of these HLMA-QH00 are made by encapsulating LED chips on axial lead frames to form molded epoxy subminiature lamp packages. A variety of package configuration options is available. These include special surface mount lead configurations, gull wing, yoke lead, or Z-bend. Right angle lead bends at 2.54 mm (0.100 inch) and 5.08 mm (0.200 inch) center spacing are available for through hole mounting. For more infor-mation refer to Standard SMT and Through Hole Lead Bend Options for Subminiature LED Lamps data sheet.

Technology
These HLMA-QH00subminiature solid state lamps utilize the newly developed aluminum indium gallium phosphide (AlInGaP) LED technologies, the absorbing substrate carrier technology (AS = HLMA-Devices)

The HLMA-QH00 flat top lamps use an untinted, nondiffused, truncated lens to provide a wide radiation pattern that is necessary for use in backlighting applications. The flat top lamps are also ideal for use as emitters in light pipe applications.





Parameters:

Technical/Catalog Information	HLMA-QH00
Vendor	Avago Technologies US Inc.
Category	Optoelectronics
Color	Red-Orange
Lens Style/Size	Round, 1.8mm
Millicandela Rating	500mcd
Voltage - Forward (Vf) Typ	1.9V
Wavelength - Dominant	615nm
Wavelength - Peak	621nm
Current - Test	20mA
Viewing Angle	30°
Lens Type	Clear
Luminous Flux	250 mlm
Package / Case	Axial
Mounting Type	Through Hole
Packaging	Bulk
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	HLMA QH00 HLMAQH00