HLMP-6820

Wavelength/Color Temperature :
Illumination Color : Green
Packaging : Bulk
Luminous Intensity : 2 mcd
Lens Color/Style : Tinted, Diffused
Viewing Angle : 90 deg
LED Size : 2.1 mm x 2.2 mm
Forward Current : 3.5 mA
Forward Voltage : 5 V


Pinout






Description

Dome Packages
The HLMP-6820 Series dome lamps for use as indicators use a tinted, diffused lens to provide a wide viewing angle with a high on-off contrast ratio.

Resistor Lamps
The HLMP-6820 Series 5 volt subminiature lamps with built in current limiting resistors are for use in applications where space is at a premium.

Lead Configurations
All of these HLMP-6820  devices are made by encapsulating LED chips on axial lead frames to form molded epoxy subminiature lamp packages. A variety of package configuration options is available. These include special surface mount lead configurations, gull wing, yoke lead or Z-bend. Right angle lead bends at 2.54 mm (0.100 inch) and 5.08 mm (0.200 inch) center spacing are available for through hole mounting. For more information refer to Standard SMT and Through Hole Lead Bend Options for Subminiature LED Lamps datasheet.

The HLMP-6820 T-3/4 square based LEDs contain an integral resistor which is in series with the emitter chip.This construction allows for the operation in circuits with 5V supply voltage;without the use of an external resistor.

Features of the HLMP-6820 are:(1)integral current limiting resistor;(2)TTL compatible;(3)wide viewing angle;(4)solid-state reliability;(5)SMT lead formings and T&R available.

The absolute maximum ratings of the HLMP-6820 can be summarized as:(1):the parameter is power dissipation,the rating is 135,the unit is mW;(2):the parameter is DC forward voltage,the rating is 6,the unit is V;(3):the parameter is lead soldering time at,the rating is 3,the unit is sec;(4):the parameter is surface mount reflow soldering convective IR at 235,the rating is 90,the unit is seconds;(5):the parameter is surface mount reflow soldering vapour phase at 213,the rating is 3,the unit is minutes;(6):the parameter is operating temperature range,the rating is -40 to 85,the unit is ;(7):the parameter is storage temperature range,the rating is -55 to 100,the unit is ;(8):the parameter is thermal resistance,the rating is 120,the unit is /W.

Parameters:

Technical/Catalog Information	HLMP-6820
Vendor	Avago Technologies US Inc.
Category	Optoelectronics
Color	Green
Lens Style/Size	Round, 1.8mm
Millicandela Rating	2mcd
Voltage - Forward (Vf) Typ	5.0V
Wavelength - Dominant	569nm
Wavelength - Peak	565nm
Current - Test	3.5mA
Viewing Angle	90°
Lens Type	Diffused, Green Tinted
Luminous Flux	4 mlm
Package / Case	Axial
Mounting Type	Through Hole
Packaging	Bulk
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	HLMP 6820 HLMP6820 516 1408 ND 5161408ND 516-1408