HLMP-S100

Forward Current :
Forward Voltage :
Illumination Color : Red
Packaging : Bulk
Lens Color/Style : Tinted, Diffused
Viewing Angle : 110 deg
LED Size : 2 mm x 5 mm
Wavelength/Color Temperature : 637 nm
Luminous Intensity : 7.5 mcd


Features:

• Rectangular Light Emitting Surface
• Excellent for Flush Mounting on Panels
• Choice of Five Bright Colors
• Long Life: Solid State Reliability
• Excellent Uniformity of Light Output




Specifications

• Viewing Angles Match Traffic Management Requirements
• Colors Meet Automotive and Traffic Signal Specifications
• Superior Light Output Performance in Outdoor Environments
• Suitable for Autoinsertion into PC Boards

Parameter	AlGaAs Red	High Efficiency Red/Orange	Yellow	Green/ Emerald Green	Units
Peak Forward Current	300	90	60	90	mA
Average Forward Current [1]	20	25	20	25	mA
DC Current [2]	30	30	20	30	mA
Transient Forward Current [3] (10 msec Pulse)	500				mA
LED Junction Temperature	100	110	110	110
Operating Temperature Range	-20 to +100	-55 to +100	-55 to +100	-20 to +100
Storage Temperature Range	-55 to +100			-55 to +100
Lead Soldering Temperature [1.6 mm (0.063 in.) below seating plane]	260°C for 5 seconds

Notes:
1. See Figure 5 to establish pulsed operating conditions.
2. For AlGaAs Red, Red, Orange, and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.34 mA/°C.
3. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and wire bond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the Absolute Maximum Ratings.




Description

The HLMP-S100 is epoxy encapsulated lamp in rectangular package which is easily stacked in arrays or used for discrete front panel indicators. Contrast and light uniformity are enhanced by a special epoxy diffusion and tinting process.

The HLMP-S100 uses double heterojunction (DH) absorbing substrate (AS) Aliminium Gallium Arsenide (AlGaAs) LEDs to produce outstanding light output over a wide range of drive currents.

The HLMP-S100, -S200, -S300, -S400, -S500, S600 are epoxy encapsulated lamps in rectangular packages which are easily stacked in arrays or used for discrete front panel indicators. Contrast and light uniformity are enhanced by a special epoxy diffusion and tinting process.

The HLMP-S100 uses double heterojunction (DH) absorbing substrate (AS) aluminum gallium arsenide (AlGaAs) LEDs to produce outstanding light output




Parameters:

Technical/Catalog Information	HLMP-S100
Vendor	Avago Technologies US Inc.
Category	Optoelectronics
Color	Red
Lens Style/Size	Rectangle, 5mm x 2mm
Millicandela Rating	7.5mcd
Voltage - Forward (Vf) Typ	1.8V
Wavelength - Dominant	637nm
Wavelength - Peak	645nm
Current - Test	20mA
Viewing Angle	110°
Lens Type	Diffused, Red Tinted
Luminous Flux	20 mlm
Package / Case	Radial
Mounting Type	Through Hole
Packaging	Bulk
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	HLMP S100 HLMPS100 516 1281 ND 5161281ND 516-1281