HLMP-S600

Features:

• Rectangular Light Emitting Surface
• Excellent for Flush Mounting on Panels
• Choice of Five Bright Colors
• Long Life: Solid State Reliability
• Excellent Uniformity of Light Output


Specifications

Parameter	AlGaAs Red	High Efficiency Red/Orange	Yellow	Green/ Emerald Green	Units
Peak Forward Current	300	90	60	90	mA
Average Forward Current [1]	20	25	20	25	mA
DC Current [2]	30	30	20	30	mA
Transient Forward Current [3] (10 msec Pulse)	500				mA
LED Junction Temperature	100	110	110	110
Operating Temperature Range	-20 to +100	-55 to +100	-55 to +100	-20 to +100
Storage Temperature Range	-55 to +100			-55 to +100
Lead Soldering Temperature [1.6 mm (0.063 in.) below seating plane]	260°C for 5 seconds

Notes:
1. See Figure 5 to establish pulsed operating conditions.
2. For AlGaAs Red, Red, Orange, and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.34 mA/°C.
3. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and wire bond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the Absolute Maximum Ratings.


Description

The HLMP-S100, -S200, -S300, -S400, -S500, S600 are epoxy encapsulated lamps in rectangular packages which are easily stacked in arrays or used for discrete front panel indicators. Contrast and light uniformity are enhanced by a special epoxy diffusion and tinting process. The HLMP-S100 uses double heterojunction (DH) absorbing substrate (AS) aluminum gallium arsenide (AlGaAs) LEDs to produce outstanding light output