Features: 4x2 Switch Matrix Using One IC4x4 Switch Matrix Using Two ICsIntegrated 4 Bit DecoderSingle Positive Supply: Vdd = +5VQFN Leadless SMT Package, 16 mm2Application4x2 Switch Matrix for 0.2 - 3.0 GHz Applications:• Cable Modem• CATV• Cellular Systems• DBSPinoutSpecif...
HMC276LP4E: Features: 4x2 Switch Matrix Using One IC4x4 Switch Matrix Using Two ICsIntegrated 4 Bit DecoderSingle Positive Supply: Vdd = +5VQFN Leadless SMT Package, 16 mm2Application4x2 Switch Matrix for 0.2 -...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Bias Voltage Range (Vdd) | +8.0 Vdc |
Control Voltage Range (All Logic Lines) |
Vdd +0.5 to -0.2V Vdc |
Channel Temperature | 150 |
Thermal Resistance | 325/W |
Storage Temperature | -65 to +150 |
Operating Temperature | -40 to +85 |
Maximum Input Power (Each Input) | +23 dBm (200 - 2150 MHz) |
The HMC276LP4 & HMC276LP4E are low-cost 4x2 switch matrices in leadless QFN 4x4 mm surface mount packages for use in RF multiplexing applications from 200 to 3000 MHz. A positive voltage controlled 4 bit decoder is integrated on the switch. The switches may be used in either 75 ohm or 50 ohm systems.
Both HMC276LP4 & HMC276LP4E switch outputs (OP1 & OP2) can independently select any of the four inputs (HH, HL, VH, VL) or simultaneously select the same inputs. Note that the switch is bi-directional and input/output functionality may be interchanged. The recommended loading impedance is 62.5 ohms on each input (HH, HL, VH, VL) and 75 ohms on each output (OP1 & OP2). All data presented was measured in a 50 ohm (input/output) system.