HS-A1370 series

The HS-A1370 series of quartz crystal oscillators provide enable/disable 3-state CMOS compatible signals for bus connected systems. Supplying Pin 1 of the HS-A1370 units with a logic"0" enables the output on Pin 8.Alternately,supplying pin 1 of the HS-A1380 units with a logic"1" enables its Pin 8 output.In the disabled mode, Pin 8 presents a high impedance to the load. All units are resistance welded in an all metal package,offering RFI shielding,and are designed to survive standard wave soldering operations without damage.Insulated standoffs to enhance board cleaning are standard.

Features of HS-A1370 series can be summarized as:(1)roHS compliant,lead free construction;(2)gold plated leads-solder dipped leads available upon request;(3)low power consumption;(4)no internal PLL avoids cascading PLL problems;(5)power supply decoupling internal;(6)high Q Crystal actively tuned oscillator circuit;(7)wide frequency range-15.0 MHz to 250.0 MHz;(8)user specified tolerance available;(9)will withstand vapor phase temperatures of 253°C for 4 minutes maximum;(10)space-saving alternative to discrete component oscillators;(11)all metal, resistance weld, hermetically sealed package;(12)3.3 Volt operation.

Some general characteristics of the HS-A1370 series are:(1)supply voltage:2.97 V to 3.63 V;(2)supply current:0.0 mA to 40 mA;(3)output current:0.0 mA to 16.0 mA;(4)operating temperature:0°C to 70°C;(5)storage temperature:-55°C to 125°C;(6)power dissipation:145 mW;(7)lead temperature:300°C(soldering,10 sec.).