ICE3B1565J

Operating Supply Voltage :
Operating Supply Current :
Number of Outputs : 1
Mounting Style : Through Hole
Maximum Operating Temperature : + 150 C
Duty Cycle (Max) : 80 %
Fall Time : 30 ns
Package / Case : PDIP-8
Rise Time : 30 ns
Switching Frequency : 74.5 KHz


Features:

• 650V Avalanche Rugged CoolMOS™ with built in switchable Startup Cell
• Active Burst Mode for lowest Standby Power @ light load controlled by Feedback Signal
• Fast Load Jump Response in Active Burst Mode
• 67 kHz fixed Switching Frequency
• Auto Restart Mode for Over temperature Detection
• Auto Restart Mode for Overvoltage Detection
• Auto Restart Mode for Overload and Open Loop
• Auto Restart Mode for VCC Undervoltage
• User defined Soft Start
• Minimum of external Components required
• Max Duty Cycle 75%
• Overall Tolerance of Current Limiting < ±5%
• Internal Leading Edge Blanking
• BiCMOS technology provides wide V_CC Range
• Frequency Jittering for Low EMI


Specifications

Note: Absolute maximum ratings are defined as ratings, which when being exceeded may lead to destruction of the integrated circuit. For the same reason make sure, that any capacitor that will be connected to pin 7 (V_CC) is discharged before assembling the application circuit.

Parameter		Symbol	Limit Values		Unit	Remarks
			min.	max.
Drain Source Voltage		VDS	-	650	V	Tj = 110
Pulse drain current, tp limited by max. Tj=150	ICE3B0365J	ID_Puls1	-	0.9	A
	ICE3B0565J	ID_Puls2	-	1.6	A
	ICE3B1565J	ID_Puls3	-	6.1	A
Avalanche energy, repetitive tAR limited by max. Tj=1501)	ICE3B0365J	EAR1	-	0.005	mJ
	ICE3B0565J	EAR2	-	0.01	mJ
	ICE3B1565J	EAR3	-	0.15	mJ
Avalanche current, repetitive tAR limited by max. Tj=1501)	ICE3B0365J	IAR1	-	0.3	A
	ICE3B0565J	IAR2	-	0.5	A
	ICE3B1565J	IAR3	-	1.5	A
VCC Supply Voltage		VVCC	-0.3	27	V
FB Voltage		VFB	-0.3	5.0	V
SoftS Voltage		VSoftS	-0.3	5.0	V
CS Voltage		VCS	-0.3	5.0	V
Junction Temperature		Tj	-40	150		Controller & CoolMOS™
Storage Temperature		TS	-55	150
Thermal Resistance Junction-Ambient		RthJA	-	90	K/W	PG-DIP-8-6
ESD Capability		VESD	-	2	kV	Human body model2)

1) Repetetive avalanche causes additional power losses that can be calculated as P_AV=E_AR* f
2) According to EIA/JESD22-A114-B (discharging a 100pF capacitor through a 1.5k series resistor)


Description

The CoolSET™-F3(Jitter version) of the ICE3B1565J meets the requirements for Off-Line Battery Adapters and low cost SMPS for the lower power range. By use of a BiCMOS technology a wide V_CC range up to 26V is provided. This covers the changes in the auxiliary supply voltage if a CV/CC regulation is implemented on the secondary side. Furthermore an Active Burst Mode is integrated to fullfill the lowest Standby Power Requirements <100mW at no load and V_in = 270VAC. As during Active Burst Mode the controller of the ICE3B1565J is always active there is an immediate response on load jumps possible without any black out in the SMPS. In Active Burst Mode the ripple of the output voltage can be reduced <1%.Furthermore Auto Restart Mode is entered in case of Overtemperature, V_CC Overvoltage, Output Open loop or Overload and V_CC Undervoltage. By means of the internal precise peak current limitation, the dimension of the transformer and the secondary diode can be lowered which leads to more cost efficiency.

Parameters:

Technical/Catalog Information	ICE3B1565J
Vendor	Infineon Technologies
Category	Integrated Circuits (ICs)
Packaging	Tube
Package / Case	8-DIP
Power (Watts)	42W
Voltage - Input	11 ~ 27 V
Voltage - Output	650V
Frequency Range	58 ~ 76kHz
Operating Temperature	-40°C ~ 150°C
Output Isolation	Isolated
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	ICE3B1565J ICE3B1565J